Skip to content

Pro Rally

XYZ Racing Pro Rally Coilovers — Alfa Romeo 145 TS 1994-2001

SKU: TS-PR

  • IncludesFull set of 4 (front + rear)
  • Top mountPillow ball + rubber / Hardened rubber / OE (factory) mount
  • Lead time10–15 working days

Fits Alfa Romeo 145 TS (1994-2001) chassis TS

Lead time: 10–15 working days from payment


£6,000.00

Made to order. Full payment is taken at checkout. Production begins once payment is confirmed.

Pay by card, Apple Pay, Google Pay — or Klarna on eligible orders.

XYZ Racing Pro Rally Coilovers — Alfa Romeo 145 TS 1994-2001

The Alfa Romeo 145 TS rides on a lightweight Fiat Tipo-derived floorpan, and its Twin Spark four sits well forward over the driven axle – a layout that loads the nose hard on loose surfaces and rewards a damper that can keep the front tyres biting through gravel and snow. The XYZ Racing Pro Rally coilover for the 145 TS is built for that exact arena: top-flight rally competition, not a Sunday B-road blast.

This is the serious end of the range. Where a fast-road kit chases comfort, the Pro Rally setup is sized for stage abuse – long wheel travel, valving that survives repeated heavy hits, and the ride-height and corner-weight control a competitive 145 needs across changing surfaces.

What this coilover does for your 1994-2001 Alfa Romeo 145 TS

Fit one and the 145 stops floating over mid-corner ruts. The increased, properly damped travel lets the loaded front wheel follow the surface instead of skating across it, so the Twin Spark’s torque actually reaches the road on corner exit. You gain genuine control over ride height and corner weights, which on a nose-heavy front-driver is the difference between a car that pushes wide and one that rotates on the throttle. Braking into a loose hairpin becomes something you can lean on rather than merely survive, and the rear stays settled enough to place the car on the way in. On gravel and snow the result is a 145 you can drive with intent rather than caution.

About the Pro Rally coilover

XYZ Racing build the Pro Rally kit specifically for loose-surface stage work – gravel and snow rather than tarmac. The range splits into two fitment philosophies. The first is an amateur-level setup that bolts straight to the standard 145 shell with no bodywork changes, so a privateer can run a competitive coilover without cutting into the car. The second is a professional-level installation intended for a car whose body has already been modified for competition, freeing the geometry and travel a works-style build demands. Both share the same brief: long, well-controlled travel, valving tuned for repeated impacts, and the structural margin to take landings and ruts that would overwhelm a road damper. For a 145 TS owner choosing between the two, the question is simply how far the rest of the car has already been taken.

Fitment for the Alfa Romeo 145 TS (1994-2001)

This kit is matched to the Twin Spark 145 TS across the full 1994 to 2001 production run. It suits the front-wheel-drive TS chassis as supplied; confirm your exact engine and any existing competition modifications before ordering, since the Pro Rally range covers both standard-shell and modified-body installations.

What buyers also search for

  • Alfa Romeo 145 TS rally coilover for gravel and snow stages
  • Alfa Romeo 145 suspension upgrade for loose-surface competition
  • Pro Rally coilover options for a standard or modified 145 shell
  • Alfa Romeo 145 TS ride-height and corner-weight adjustment for stage use
  • Coilovers for keeping a 1990s Alfa Romeo 145 competitive in 2026

If you’re campaigning a 145 TS on the loose, this is the XYZ Racing kit built for it – check your fitment level and configure yours below.

Rally gravel/snow suspensions are very professional suspensions and they are designed into two types:

1. Be installed directly with the original chassis. (Amateur type)
2. Be installed after modifying the car body. (Professional type)

Top mounts included with your kit

Every XYZ Racing coilover kit ships with the upper mounts listed below for your exact chassis — no extra parts to source.

  • Pillow ball + rubber top mountPillow ball + rubberP+Pillow-ball upper with a rubber insert — adds steering precision and camber adjustability while keeping some of the factory mount’s harshness damping.
  • Hardened rubber top mountHardened rubberRHardened rubber upper — firmer than the factory bush for tighter response while retaining road-friendly noise and vibration isolation.
  • OE (factory) mount top mountOE (factory) mountOERetains the OEM (factory) upper mount — preserves the original ride comfort, noise and vibration behaviour for a stock-like feel.
Same car

Other products that fit this vehicle

Coilover ranges, brake kits and wheels for this car