
XYZ Racing Hollow Rear Brake Kit — Volkswagen CADDY (2010-2015)
SKU: XYZ-BRK-BKR-VO-009-REAR
- IncludesRear axle pair (2 discs + 2 calipers)
- PositionRear
- Disc Ø380–421 mm
- Caliper pots8-pot
- Lead time10–15 working days
Fits Volkswagen CADDY (2010-2015)
Added to basket ✓
Caliper render for this kit:

The 2010-2015 Caddy carries its weight over a leaf-sprung rigid rear axle built for payload, and on a great many of these vans the back end still leans on drums or undersized discs from the factory. That is precisely the gap this rear brake setup is built to close: more disc, better heat handling, and a rear axle that finally pulls its share under load.
For a platform that spends its life loaded, whether it is a tradesman’s tools, a camper conversion, a roof box and four passengers, or a braked trailer on the hitch, the rear brakes do real work. The XYZ Racing Hollow Rear Brake Kit for the Volkswagen Caddy gives the rear of the van the thermal headroom that a drum simply cannot, so the front axle stops doing all the heavy lifting on repeated stops.
What this brake kit does for your 2010-2015 Volkswagen Caddy
Move the Caddy’s rear braking onto a properly sized disc and the first thing you feel is a firmer, more progressive pedal that does not go long when the van is laden. Heat that used to soak into a drum now sheds into open air through the hollow-vane disc, so braking from motorway speed with a full load behind you stays consistent rather than fading off. Rear bias improves too, which settles the back of a leaf-sprung Caddy under hard braking and keeps it tracking straight. Pad compound is your call: Street for quiet, low-dust everyday running, Sport for harder road and tow-day use with the heat range for occasional fast work, and a Racing compound when the van sees genuinely heavy or repeated stops.
About the Hollow Rear Brake Kit
The Hollow name refers to the disc, a two-piece floating rotor with a hollow-vane core that trims rotating and unsprung mass at the rear axle without giving up swept area or thermal capacity. It is a complete rear-axle solution supplied as a matched left-and-right pair, caliper, carrier and disc, rather than a pad-and-disc patch. The caliper is hollow-bodied as standard, with a Hollow Racing upgrade for harder use that drops the dust cover, is rated to 1000C and carries a two-year warranty. Three pad compounds ship as options, Street, Sport and Racing, so the same hardware suits a daily van, a touring camper, or a working Caddy that tows. Faces come drilled or slotted at the same price, and calipers are finished in your choice of the included Red, Yellow, Gold, Black and Anodized Black at no extra cost, premium polished-forged and candy finishes, or any Pantone as a custom colour, so the upgrade reads as intentional behind an aftermarket wheel. The engineering priority throughout is repeatable, fade-resistant stopping on a vehicle that is rarely empty.
Fitment for the Volkswagen Caddy (2010-2015)
This kit is mapped to the facelifted 2K-generation Volkswagen Caddy across the 2010 to 2015 model years, fitting the rear axle as a left-and-right pair. Confirm your exact build and rear hub arrangement before ordering, as factory rear setups on this Caddy ranged from drums to discs depending on spec.
What buyers also search for
- Volkswagen Caddy rear disc conversion for vans running drums from the factory
- Caddy 2010-2015 rear big brake kit for towing and laden braking
- Volkswagen Caddy camper conversion rear brake upgrade
- Caddy rear brake kit with Sport and Racing pad compound options
- Coloured caliper rear brake kit for the 2K Volkswagen Caddy
Choose your pad compound and caliper colour above and order your Caddy rear brake kit.
What’s in the kit
Rear axle kit — supplied as a complete bolt-on assembly.
- 2×Two-piece floating discs — 380–421 mm: you pick the exact diameter with the "Disc size" option
- 2×Lightweight aluminium centre bells
- 2×Forged aluminium calipers — 8-pot
- 2×High-stiffness mounting brackets
- 2×Braided stainless steel brake lines
- 4×High-performance brake pads (1 set)
- 1×Fitting hardware & tools pack
Parking brake: OE handbrake not retained — a hydraulic handbrake is required.
Choosing your spec
Every kit is built to order around the choices you make above. Here is what each option actually changes, so you can spec yours with confidence.
Brake pads — Street, Sport or Racing
Every kit ships with a full set of high-performance pads; the compound is your call.
Street is the right default for fast-road driving — a strong, progressive cold bite with low noise, low dust and long disc life. Sport raises the working temperature and adds bite and fade resistance for hard road use and the occasional track day, while still behaving on a cold morning. Racing is a track compound built for sustained abuse: huge fade resistance and bite once heat is in it, at the cost of more noise and dust when cold. Match the pad to how hard you actually use the brakes — there is no benefit to a race pad that never gets up to temperature.
Caliper grade — Hollow vs Hollow Racing
Hollow is the standard caliper on every kit: a hollow-body forged caliper, lighter than a solid one, fitted with a dust cover and backed by a 5-year oil-leak warranty. For most fast-road and spirited track use it is all the caliper you need.
Hollow Racing is the track-grade upgrade. It runs the same hollow body but without a dust cover (so there is nothing to melt at sustained high temperature), uses a twin-metal piston that isolates heat travelling from the disc to the oil seal, and is rated to 1000°C. Available 330–356mm (rear). Warranty is 2 years on oil leaks and 10 years on appearance. Built for professional racing and repeated track days.

Caliper colour & finish
Painted colours (Red, Yellow, Gold, Black, Anodized Black) are included at no cost. Want an exact match to your car? Custom Color (+£150) paints the calipers to any Pantone code you supply (15–20 day lead time).
Polished Forged finishes are the flagship: a forged caliper given a mirror-polished surface treatment that shifts colour with the viewing angle. Beyond the looks, the polished surface dissipates heat better, resists rust and stands up to the weather. Choose Titanium (neochrome, +£350), Polished Gold (+£300) or Polished Silver (+£250). They look their best paired with a titanium centre bell. Care: clean only with a dilute neutral cleaner or water.
Candy colours (+£200) use a deep candy-paint and polishing process for a mirror-reflection, boutique finish — pick Teal, Blue, Red or Orange (shown below right).


Centre bells
The centre bell is the CNC-machined aluminium hat that joins the disc to the hub. The standard anodized centre bell is included. The Two-tone bell (+£200) adds an anodized accent ring — choose Red, Yellow, Orange, Purple or Silver right here at checkout. The Titanium centre bell (+£500) is a forged titanium bell (bolts not included) that finishes off the polished-forged look.

Other products that fit this vehicle
Front & rear brake kits, coilovers and more for this car
