XYZ Racing Racing Spec Coilovers — Toyota GR YARIS RS MXPA12 2020-2026

The GR Yaris’s GR-FOUR system moves torque between front and rear axles mid-corner, and that split only does its job if the chassis holds a consistent geometry while it happens. Soft factory-spec dampers let the short-wheelbase MXPA12 pitch and roll under the weight transfer an all-wheel-drive system creates, which blunts the very traction advantage the car was homologated for. The XYZ Racing Racing Spec coilover is built to control that movement at track pace.

This is the range built for serious circuit and time-attack driving, not fast-road comfort. It replaces the compromise-tuned OE suspension with a damper set developed specifically around repeated high-load laps, where consistency matters more than ride quality.

What this coilover does for your 2020-2026 Toyota GR Yaris RS MXPA12

Full-range damping adjustment lets you set compression and rebound independently for the GR Yaris’s three-cylinder turbo weight bias and its AWD-specific load transfer, rather than accepting a single fast-road compromise. Lowering the ride height and stiffening spring rates reduces the body roll that works against GR-FOUR’s torque-vectoring under hard cornering, keeping contact patches more consistent as the diff sends drive rearward. On a chassis this compact, small changes in geometry show up immediately in turn-in response – this coilover gives you the range to tune that response to your own circuit and driving style rather than living with a fixed factory setting. The result on track is a GR Yaris that holds its line through direction changes with less of the pitch and dive that costs confidence on the brakes into a hairpin.

About the Racing Spec coilover

XYZ Racing’s Racing Spec damper is built for dedicated track use, with its baseline settings developed through direct involvement in circuit racing, including WTCC competition. That racing-derived tuning is why the range favours precision and repeatability over daily comfort – it is a damper calibrated for cars that spend their life on a circuit, not commuting between them. For GR Yaris owners running factory-level power and chassis mods, the standard Racing Spec calibration covers the brief. For cars carrying more aggressive upgrades – bigger turbos, wider track, higher boost – XYZ Racing also produces custom-valved dampers, built around details of the specific modifications and the circuit the car runs, in the same way the brand supplies shocks for A-class racing cars. It is a route worth knowing about if your GR Yaris moves beyond a bolt-on Circuit Pack spec.

Fitment for the Toyota GR Yaris RS MXPA12 (2020-2026)

This kit is engineered for the MXPA12 chassis Toyota GR Yaris RS, covering the full 2020-2026 production run. Confirm your car carries the MXPA12 chassis code before ordering, as fitment is specific to this generation and does not cross over to other Yaris variants.

What buyers also search for

• Toyota GR Yaris MXPA12 track coilovers for time-attack and trackday use
• GR Yaris RS suspension upgrade to control body roll under GR-FOUR load transfer
• MXPA12 damping setup for repeat lap sessions rather than one-off track outings
• Toyota GR Yaris circuit-ready coilover kit with full adjustment range

Spec your damping range and ride height for the MXPA12 chassis, then configure yours below.