Skip to content

Tarmac Rally

XYZ Racing Tarmac Rally Coilovers — Skoda SUPERB B8 WAGON 4WD φ55 (Cancellation Kit for Electronic Damping) 2015-2026

SKU: SK27C-TR

  • IncludesFull set of 4 (front + rear)
  • Spring rate (F/R)20 / 5 kg/mm
  • Top mountFront: Pillow ball + rubber / Hardened rubber · Rear: OE (factory) mount
  • Lead time10–15 working days

Fits Skoda SUPERB B8 WAGON 4WD φ55 (Cancellation Kit for Electronic Damping) (2015-2026) chassis SK27C

Front spring rate (kg/mm)

20 kg/mm recommended

The recommended rate is the factory setup for your exact car — leave it unless a suspension specialist has specified otherwise. Recommended: 20 kg/mm. A custom rate on this axle adds £80.00.

Rear spring rate (kg/mm)

5 kg/mm recommended

The recommended rate is the factory setup for your exact car — leave it unless a suspension specialist has specified otherwise. Recommended: 5 kg/mm. A custom rate on this axle adds £80.00.

Configured price£2,090.00Inc. VAT

Lead time: 10–15 working days from payment


£2,090.00

Made to order. Full payment is taken at checkout. Production begins once payment is confirmed.

Pay by card, Apple Pay, Google Pay — or Klarna on eligible orders.

XYZ Racing Tarmac Rally Coilovers — Skoda SUPERB B8 WAGON 4WD φ55 (Cancellation Kit for Electronic Damping) 2015-2026

The Superb B8 Wagon’s Haldex-based 4WD system and factory Dynamic Chassis Control turn a straightforward big estate into something more complicated the moment it goes onto a rally stage: sensor-fed adaptive dampers tuned for motorway comfort, not compression-heavy tarmac crests and rutted stage surfaces. XYZ Racing’s Tarmac Rally coilover replaces that electronic damping loop with a fixed, mechanically adjustable set-up built for sealed-stage work, and the supplied cancellation kit stops the DCC module throwing faults once the factory sensors are gone.

This is the Tarmac Rally spec, not a fast-road or track-day damper – it is set up for the repeated big hits, crests and camber changes of closed tarmac stages, where the coilover has to keep the tyre loaded through compressions most road-going suspension never sees. Fitted to a Superb Wagon carrying stage kit and a heavier AWD driveline, it is built to hold that mass in check without the body ballooning around mid-corner.

What this coilover does for your 2015-2026 Skoda Superb B8 Wagon 4WD

A Superb Wagon in 4WD guise carries more weight over the rear axle than the front-drive saloon, and the Haldex clutch pack adds another layer of load transfer under hard throttle out of a hairpin. The damping and spring rate on this fitment are set to control that extra mass through compression events – the moments where a stock DCC-equipped car would crash through, or soften off mid-stage as the electronic system hunts for a setting. Because the kit is height-adjustable, you can set the Superb’s ride height to protect the sump and subframe on rough stages without losing the geometry the AWD system needs to put power down cleanly out of slow corners. The cancellation kit keeps the swap electrically clean – no DCC warning lights, no adaptive-damper fault codes fighting the new hardware every time the ECU polls a sensor that no longer exists. On a car this size and weight, predictable damper behaviour over broken tarmac at speed matters more than outright stiffness, and that’s what this set-up is built to deliver.

About the Tarmac Rally coilover

The Tarmac Rally coilover is built around the demands of sealed asphalt stages rather than circuit or fast-road driving. Its valving is calibrated to absorb the impact of uneven road surfaces and to control the jolt through the chassis when the car lands hard off a crest or crosses a significant bump mid-stage. That control matters for two reasons: it stops the body pitching and squatting excessively under load, and it keeps the tyre pressed into the surface for traction rather than skipping across it. XYZ Racing sets the damping and spring specification for this range using data drawn directly from its own tarmac rally programme, rather than adapting a road or circuit base spec, so the behaviour under compression is aimed at stage conditions from the outset. On a 4WD Superb Wagon, that means a chassis that stays composed and planted when the surface deteriorates – exactly where a stock adaptive set-up runs out of ideas.

Fitment for the Skoda Superb B8 Wagon 4WD (2015-2026)

This kit is engineered for the Skoda Superb B8 Wagon in 4WD guise, chassis code SK27-C, covering the 2015 to 2026 production run. It is specified for the φ55 damper body and includes the cancellation kit required to disable factory electronic damping control on cars fitted with DCC from new, so the swap doesn’t leave a fault code sitting on the dash.

What buyers also search for

  • Skoda Superb B8 Wagon 4WD coilover upgrade for tarmac rally and fast road use
  • Skoda Superb B8 Wagon Tarmac Rally damping built for stage-surface compressions
  • Skoda Superb B8 4WD DCC cancellation kit for aftermarket coilover fitment
  • Skoda Superb Wagon suspension set-up for AWD traction on broken tarmac
  • Skoda Superb B8 φ55 coilover kit for SK27-C chassis, 2015-2026

If you’re prepping a Superb B8 Wagon for stage work, or just want a chassis that copes properly with rough tarmac at speed, configure yours below.

This damper is designed for Tarmac Rally; it can absorb the impact of uneven pavement. It is able to absorb the jolt when across a big bumps, effectively suppress shock body and to increase tire’s traction. Vehicle stability makes you can experience perfect handling. All the settings from our Tarmac Rally racing experience.

Top mounts included with your kit

Every XYZ Racing coilover kit ships with the upper mounts listed below for your exact chassis — no extra parts to source.

Front

  • Pillow ball + rubber top mountPillow ball + rubberP+Pillow-ball upper with a rubber insert — adds steering precision and camber adjustability while keeping some of the factory mount’s harshness damping.
  • Hardened rubber top mountHardened rubberRHardened rubber upper — firmer than the factory bush for tighter response while retaining road-friendly noise and vibration isolation.

Rear

  • OE (factory) mount top mountOE (factory) mountOERetains the OEM (factory) upper mount — preserves the original ride comfort, noise and vibration behaviour for a stock-like feel.
Same car

Other products that fit this vehicle

Coilover ranges, brake kits and wheels for this car