Skip to content

Pro Racing Gravel/Snow

XYZ Racing Pro Racing Gravel/Snow Coilovers — BMW 4 SERIES G82 M4 (Modified Rear Integrated) (Cancellation Kit for Electronic Damping) 2021-2026

SKU: BM1181C-PRG

  • IncludesFull set of 4 (front + rear)
  • Spring rate (F/R)6 / 6 kg/mm
  • Top mountFront: Pillow ball + rubber / Hardened rubber · Rear: Aluminium
  • Lead time10–15 working days

Fits Bmw 4 SERIES G82 M4 (Modified Rear Integrated) (Cancellation Kit for Electronic Damping) (2021-2026) chassis BM1181C

Front spring rate (kg/mm)

6 kg/mm recommended

The recommended rate is the factory setup for your exact car — leave it unless a suspension specialist has specified otherwise. Recommended: 6 kg/mm. A custom rate on this axle adds £80.00.

Rear spring rate (kg/mm)

6 kg/mm recommended

The recommended rate is the factory setup for your exact car — leave it unless a suspension specialist has specified otherwise. Recommended: 6 kg/mm. A custom rate on this axle adds £80.00.

Configured price£3,790.00Inc. VAT

Lead time: 10–15 working days from payment


£3,790.00

Made to order. Full payment is taken at checkout. Production begins once payment is confirmed.

Pay by card, Apple Pay, Google Pay — or Klarna on eligible orders.

XYZ Racing Pro Racing Gravel/Snow Coilovers — BMW 4 SERIES G82 M4 (Modified Rear Integrated) (Cancellation Kit for Electronic Damping) 2021-2026

The G82 M4 ships with BMW’s continuously variable M Adaptive suspension, which means a fixed-rate coilover cannot simply bolt in and go quiet – the car’s electronics expect a damper signal that a mechanical unit doesn’t send. The XYZ Racing Pro Racing Gravel/Snow coilover for the Bmw 4 Series G82 M4 is built around that reality, pairing the cancellation kit for electronic damping with a modified rear integration so the swap is electrically transparent as well as mechanically sound.

Where most coilover ranges for this platform chase circuit lap time, this kit is built for rally and rallycross work – loose surfaces, compression events and stage lengths that punish a damper never designed to leave sealed tarmac. It still holds up under sustained circuit use, but travel and durability, not outright stiffness, are the design brief here.

What this coilover does for your 2021-2026 Bmw 4 Series G82 M4 (Modified Rr Integrated) (Cancellation Kit for Electronic Damping)

Longer front and rear travel gives the S58’s considerable nose weight somewhere to go when a rally stage throws up a compression or a snow bank disguises a ditch, instead of the car bottoming out and skating. A larger internal reservoir of suspension oil and nitrogen gas means the damper has more thermal mass to absorb, so response stays consistent through a long stage rather than fading as oil temperature climbs – the failure mode that ends most fixed-setup dampers on loose surfaces early. The 3 adjustment knobs let you set compression and rebound independently for the surface in front of you, from packed snow to loose gravel, without swapping hardware. On a car whose stock rear end already moves under hard load, that extra control matters more, not less, once the tarmac stops being flat and grippy.

About the Pro Racing Gravel/Snow coilover

XYZ built this design specifically for rally and rallycross use rather than adapting a circuit damper. The longer front and rear travel creates a bigger buffer before the suspension runs out of stroke, which is what keeps the car settled over the compressions and jumps that gravel and snow stages produce. Internally, the unit carries an increased volume of suspension oil and nitrogen gas, which raises the point at which oil temperature becomes a problem after sustained hard use – a real concern on stages that run far longer than a circuit session. The trade-off is the 3-knob adjustment mechanism’s small internal oil passages, which can produce a faint noise over sharp bumps; that’s the damper working as designed, not a fault. XYZ notes the same unit copes comfortably with circuit track driving too, so it isn’t a one-surface tool.

Fitment for the Bmw 4 Series G82 M4 (Modified Rr Integrated) (Cancellation Kit for Electronic Damping) (2021-2026)

This kit is specified for the Bmw 4 Series G82 M4, chassis code BM118-1-C, covering the 2021 to 2026 model years. It includes the modified rear integration and the cancellation kit needed to disable the factory M Adaptive suspension’s electronic damping signal, so the fixed-rate dampers install without triggering a fault on the car’s electronics.

What buyers also search for

  • Bmw G82 M4 rally and rallycross suspension for gravel and snow stages.
  • Bmw 4 Series M4 coilover with electronic damping cancellation kit included.
  • G82 M4 long-travel damper set-up for loose-surface and mixed-condition driving.
  • Bmw M4 suspension built for extended stage use without oil temperature fade.

Configure your Bmw 4 Series G82 M4 spec below to match this coilover to your build.

This damper is mainly design for Rally Racing or Rally Cross. With longer travel for both front and rear, it increases bigger buffer distance to keep the car stable. The most advantages of this product is to extend the amount of suspension oil and nitrogen gas which can increase the stability of the shocks and prevent the shock oil temperature too high from being exhausted after long-term use.

Because its 3 adjustment knobs with small oil hole design, when driving through big bumps, the coilover oil will go through small passage which might cause some small noise. This is normal situation. This product is made for circuit tracks and there will be no concern for bumps on the tracks.

Top mounts included with your kit

Every XYZ Racing coilover kit ships with the upper mounts listed below for your exact chassis — no extra parts to source.

Front

  • Pillow ball + rubber top mountPillow ball + rubberP+Pillow-ball upper with a rubber insert — adds steering precision and camber adjustability while keeping some of the factory mount’s harshness damping.
  • Hardened rubber top mountHardened rubberRHardened rubber upper — firmer than the factory bush for tighter response while retaining road-friendly noise and vibration isolation.

Rear

  • Aluminium top mountAluminiumAAluminium upper mount — a stiff, lightweight housing that locates the damper precisely and resists flex under load.
Same car

Other products that fit this vehicle

Coilover ranges, brake kits and wheels for this car