XYZ Racing Pro Racing Drift Spec Coilovers — Subaru IMPREZA GE/GH/GR/GB (TYPE 1) 2WD/4WD 2007-2014

The GE/GH Impreza in 2WD form carries noticeably less weight up front than the AWD variants – stripped of Subaru’s front propshaft and symmetrical transfer hardware, it offers weight distribution that makes every weight transfer during a drift entry clean and readable. The XYZ Racing Pro Racing Drift Spec coilover for the Subaru Impreza GE/GH/GR/GB (Type 1) 2WD/4WD (2007-2014) was built around that characteristic: a suspension developed specifically for competitive drifting, not adapted from a fast-road specification.

This is not a kit for the occasional trackday or spirited road use. The Drift Spec designation reflects a product calibrated for the sustained high-speed angles and rapid direction changes of a competition drift circuit – where body attitude must remain stable and recoverable, where angle must be held cleanly through a sweeper rather than simply initiated and abandoned. The Impreza’s communicative chassis is a genuine asset in this discipline; the goal here is to preserve that communication at the angles where factory geometry stops working.

What this coilover does for your 2007-2014 Subaru IMPREZA GE/GH/GR/GB (TYPE 1) 2WD/4WD

Ride height reduction through proper bump stroke engineering – rather than collapsing spring travel – lowers the roll centre without sacrificing suspension movement, keeping the geometry predictable at competition angles. Three independent adjustment knobs let you set rebound, compression, and ride height separately, so finding a stable body position through a high-speed sweeper does not require compromising the entry or exit phases. On the 2WD GE/GH platform specifically, where front-to-rear weight transfer during a drift entry is more direct and readable than on the AWD chassis, that independent control makes a measurable difference in how consistently an angle can be held from apex through exit.

About the Pro Racing Drift Spec coilover

XYZ Racing developed the Pro Racing Drift Spec line specifically for drift racing – not as a general competition coilover, but as a product designed around the particular demands of high-speed, high-angle circuit driving. Three adjustment knobs provide independent control over the damping parameters that standard single-knob competition units combine into a single unavoidable compromise, separating rebound, compression, and ride height into distinct tools the driver can configure for their circuit and style. The damper internals use a small oil hole passage design: the controlled restriction through large bump displacements is an intentional characteristic of a circuit-intended product, not a fault. On irregular road surfaces, this design may produce minor internal noise at full bump travel – on a closed circuit where bump inputs are controlled and consistent, this simply does not arise. Ride height is adjusted through calibrated bump stroke, delivering a lowered stance without eliminating the suspension travel the kit was designed to use.

Fitment for the Subaru IMPREZA GE/GH/GR/GB (TYPE 1) (2007-2014)

This kit covers the Subaru Impreza GE/GH/GR/GB (Type 1), chassis code SU06, produced from 2007 to 2014 in both 2WD and 4WD configurations. The fitment spans the GE saloon, GH five-door hatchback, and GR/GB hatchback body styles within this generation. Confirm your chassis code prefix against your VIN before ordering, as the Impreza model name continued across a subsequent platform change during this calendar period.

What buyers also search for

• Subaru Impreza GE GH drift coilover for circuit competition and sustained angle control
• Subaru Impreza 2WD suspension upgrade with three-way independent damping adjustment
• XYZ Racing Drift Spec coilover for GR GB Impreza 2007-2014 competition circuit use
• Subaru Impreza coilover with independent rebound and compression adjustment for drift
• Subaru IMPREZA GE GH GR GB coilover upgrade for controlled body position and drift angle

Configure yours below – select your drivetrain and specification using the options beneath the product images.