Skip to content

Pro Racing Gravel/Snow

XYZ Racing Pro Racing Gravel/Snow Coilovers — Nissan SILVIA S13 1989-1994

SKU: S13-PRG

  • IncludesFull set of 4 (front + rear)
  • Spring rate (F/R)6 / 6 kg/mm
  • Top mountFront: Pillow ball + rubber / Hardened rubber · Rear: Aluminium
  • Lead time10–15 working days

Fits Nissan SILVIA S13 (1989-1994) chassis S13

Front spring rate (kg/mm)

6 kg/mm recommended

The recommended rate is the factory setup for your exact car — leave it unless a suspension specialist has specified otherwise. Recommended: 6 kg/mm. A custom rate on this axle adds £80.00.

Rear spring rate (kg/mm)

6 kg/mm recommended

The recommended rate is the factory setup for your exact car — leave it unless a suspension specialist has specified otherwise. Recommended: 6 kg/mm. A custom rate on this axle adds £80.00.

Configured price£3,390.00Inc. VAT

Lead time: 10–15 working days from payment


£3,390.00

Made to order. Full payment is taken at checkout. Production begins once payment is confirmed.

Pay by card, Apple Pay, Google Pay — or Klarna on eligible orders.

XYZ Racing Pro Racing Gravel/Snow Coilovers — Nissan SILVIA S13 1989-1994

The S13 Silvia’s light rear-drive chassis has always rewarded grip you can read through the seat, and on gravel or snow that conversation gets a lot louder. The XYZ Racing Pro Racing Gravel/Snow coilover for the Nissan Silvia S13 is built for loose surfaces, running longer damper travel front and rear so the car keeps its feet when the ground drops away under a wheel.

This is not a slammed fast-road build. It is a rally and rallycross-oriented kit that trades static drop for working suspension stroke, giving the S13 room to soak up ruts, crests and compressions without running out of travel halfway through a corner.

What this coilover does for your 1989-1994 Nissan Silvia S13

The first thing you feel on a loose stage is composure. The extra buffer distance in the longer-travel damper keeps the Silvia settled over bumps that would skip a short-stroke circuit coilover, so the rear axle stays planted when you get on the throttle out of a slippery corner. The expanded oil and nitrogen volume inside each unit resists fade across a long stage or a full snow day, holding consistent damping where a smaller-capacity damper would have already cooked its oil. Three-way adjustment lets you go soft for deep snow or firm for hard-packed gravel, matching the S13’s balance to the surface in front of you. The car tracks straighter under braking and finds drive sooner on a low-grip exit.

About the Pro Racing Gravel/Snow coilover

The Pro Racing Gravel/Snow coilover is engineered first for rally and rallycross, where suspension stroke counts for more than ride height. XYZ Racing gives it longer travel at both ends and a larger reservoir of shock oil and nitrogen gas, two changes that work together to keep damping stable when the surface is rough and the session runs long. The bigger oil volume lifts the thermal ceiling, so the damper resists the heat soak that exhausts a smaller unit after sustained hammering. Adjustment runs through three knobs, and the small oil-hole design that gives such fine control will pass a faint noise through the strut when you hit a large bump at speed – that is oil moving through a deliberately narrow passage, and it is normal, not a fault. Built to shrug off the kind of impacts that define a gravel stage or a snow-covered track.

Fitment for the Nissan Silvia S13 (1989-1994)

This kit is built specifically for the Nissan Silvia S13, chassis code S13, across the 1989 to 1994 model years. Confirm your exact variant in the configurator below before ordering, since the S13 ran in several engine and market specifications over its life.

What buyers also search for

  • Nissan Silvia S13 rally suspension upgrade for gravel and snow stages
  • S13 Silvia coilover with long travel for loose-surface grip
  • Nissan Silvia S13 three-way adjustable damping for rallycross use
  • Gravel and snow coilover for the 1989-1994 Silvia S13

Set your spec for the Silvia S13 – travel, spring rate and damper tune – and build yours below.

This damper is mainly design for Rally Racing or Rally Cross. With longer travel for both front and rear, it increases bigger buffer distance to keep the car stable. The most advantages of this product is to extend the amount of suspension oil and nitrogen gas which can increase the stability of the shocks and prevent the shock oil temperature too high from being exhausted after long-term use.

Because its 3 adjustment knobs with small oil hole design, when driving through big bumps, the coilover oil will go through small passage which might cause some small noise. This is normal situation. This product is made for circuit tracks and there will be no concern for bumps on the tracks.

Top mounts included with your kit

Every XYZ Racing coilover kit ships with the upper mounts listed below for your exact chassis — no extra parts to source.

Front

  • Pillow ball + rubber top mountPillow ball + rubberP+Pillow-ball upper with a rubber insert — adds steering precision and camber adjustability while keeping some of the factory mount’s harshness damping.
  • Hardened rubber top mountHardened rubberRHardened rubber upper — firmer than the factory bush for tighter response while retaining road-friendly noise and vibration isolation.

Rear

  • Aluminium top mountAluminiumAAluminium upper mount — a stiff, lightweight housing that locates the damper precisely and resists flex under load.
Same car

Other products that fit this vehicle

Coilover ranges, brake kits and wheels for this car