XYZ Racing Pro Rally Coilovers — Peugeot 807 2002-2014

The Peugeot 807 was never built to be thrown down a gravel stage. It is a tall, front-drive Sevel-platform MPV with soft, comfort-biased damping and a heavy nose that leans the moment you load it into a corner. The XYZ Racing Pro Rally coilover exists for the rare owner who wants to rewrite that brief, taking a 2002-2014 people carrier and giving it the ride-height control and damper authority that loose competition surfaces demand.

This is rally hardware first and foremost, set up for gravel and snow rather than smooth circuit tarmac. Where the standard 807 struts run short on travel and composure over broken ground, the Pro Rally kit is built to keep the chassis settled, absorbing the kind of repeated impacts that bottom out the factory suspension.

What this coilover kit does for your 2002-2014 Peugeot 807

The first thing you feel is body control. The 807 carries a lot of mass high up, and the Pro Rally coilover reins in the roll and pitch that make a standard MPV feel vague when the surface turns rough. Height adjustment lets you set the car up for the terrain rather than the school run, clearing ruts and crests that would otherwise ground out the floorpan. Firmer, competition-oriented damping keeps the front wheels in contact with the ground over washboard gravel, which translates directly into steering response and braking confidence on a stage. For a nose-heavy front-driver, that recovered front-end discipline is the single biggest change you will notice.

About the Pro Rally coilover

The Pro Rally is XYZ Racing’s gravel and snow competition suspension, built to a genuinely professional standard rather than as a fast-road compromise. It is offered in two distinct configurations to suit how seriously the car is being prepared. The amateur specification is designed to bolt straight onto the original 807 chassis with no bodywork changes, making it the entry point for owners stepping into loose-surface events. The professional specification is intended to be installed after the car body has been modified, freeing up the geometry and travel that top-flight rally use actually needs. Both share the same focus: surviving and performing on gravel and snow, where suspension takes a beating that road coilovers are never asked to endure.

Fitment for the Peugeot 807 (2002-2014)

This kit is matched to the Peugeot 807, chassis code PE14, across the full 2002 to 2014 production run. It is built specifically for that platform, so the mounting points and travel are sized for the 807 rather than adapted from a generic part. Confirm your chassis code and build year against the listing before you order.

What buyers also search for

• Peugeot 807 rally suspension for gravel and snow competition
• Peugeot 807 PE14 coilover conversion for loose-surface use
• Pro Rally coilover damping built to take repeated stage impacts
• Height-adjustable Peugeot 807 suspension for rough terrain clearance
• 2002-2014 Peugeot 807 competition coilover, amateur and professional fitment

Pick your Pro Rally specification for the 807 and configure yours below.