XYZ Racing Pro Rally Coilovers — Nissan ELGRAND E51 2002-2010

The E51 Elgrand was built as a luxury people-mover: a tall body, a soft comfort-biased ride and close to two tonnes of mass riding on suspension tuned for motorway cruising. The XYZ Racing Pro Rally coilover for the Nissan Elgrand E51 throws out that brief entirely. This is gravel and snow rally hardware, built to keep a heavy vehicle composed over broken, loose and frozen surfaces where a standard damper would pack down and overheat within minutes.

It is a specialist fit rather than a fast-road lowering kit. The Pro Rally setup exists for owners running an Elgrand E51 hard off the tarmac – on forest gravel, on packed snow – and it is configured around two distinct installation routes depending on how far you are willing to modify the vehicle.

What this coilover does for your 2002-2010 Nissan Elgrand

On loose surfaces this coilover gives the Elgrand the wheel travel and damping control it never had from the factory. Where the standard struts run out of stroke and crash through their bump stops on a rutted gravel road, the Pro Rally kit keeps the tyres tracking the ground, so the heavy E51 body stays settled instead of pitching and floating. The valving is made to take repeated large impacts without fading, which matters on a vehicle this heavy where a road damper would be cooked before the stage was done. You also get the ride-height control to set the Elgrand up for the clearance a gravel or snow surface demands, rather than the low stance Nissan shipped. The result is a two-tonne MPV you can actually drive with intent on surfaces it was never sold to see.

About the Pro Rally coilover

The Pro Rally coilover sits at the specialist end of the XYZ Racing range: a dedicated rally suspension developed for gravel and snow competition rather than circuit or fast-road use. XYZ build it in two distinct forms. The first is an amateur specification that bolts straight onto the standard E51 chassis with no bodywork changes, aimed at owners who want genuine rally damping without cutting into the vehicle. The second is a full professional specification, intended to be fitted after the car body has been modified to accept it – the route a top-flight stage car takes to carry the extra travel and strut packaging it needs. Both are tuned for the loose, low-grip, high-impact world of gravel and snow stages, where the suspension has to soak up big intermittent hits and still return the wheel to the surface instantly. Which version suits you comes down to how seriously you are campaigning the Elgrand and how much fabrication you are prepared to take on.

Fitment for the Nissan Elgrand E51 (2002-2010)

This kit is cut for the E51-generation Nissan Elgrand built from 2002 to 2010, covering the full run of that chassis. Confirm your body style and drivetrain before ordering, and decide up front whether you want the bolt-in amateur specification for the standard E51 chassis or the professional specification that assumes modified bodywork. The chassis code on your vehicle should read E51 to match this fitment.

What buyers also search for

• Nissan Elgrand E51 rally suspension for gravel and snow stages
• Nissan Elgrand E51 coilover options for standard or modified bodywork
• XYZ Racing Pro Rally damping for a heavy MPV on loose surfaces
• Nissan Elgrand E51 ride-height adjustment for gravel clearance
• Pro Rally coilover fitment for the 2002-2010 Nissan Elgrand

Choose your amateur or professional Pro Rally specification for the Nissan Elgrand E51 and configure yours using the options below.