Skip to content

Drift Spec

XYZ Racing Drift Spec Coilovers — Toyota TOWN ACE VAN 2022-2026

SKU: VAN-DS

  • IncludesFull set of 4 (front + rear)
  • Spring rate (F/R)12 / 14 kg/mm
  • Top mountPillow ball + rubber / Hardened rubber / OE (factory) mount
  • Lead time10–15 working days

Fits Toyota TOWN ACE VAN (2022-2026) chassis VAN

Front spring rate (kg/mm)

12 kg/mm recommended

The recommended rate is the factory setup for your exact car — leave it unless a suspension specialist has specified otherwise. Recommended: 12 kg/mm. A custom rate on this axle adds £80.00.

Rear spring rate (kg/mm)

14 kg/mm recommended

The recommended rate is the factory setup for your exact car — leave it unless a suspension specialist has specified otherwise. Recommended: 14 kg/mm. A custom rate on this axle adds £80.00.

Configured price£1,690.00Inc. VAT

Lead time: 10–15 working days from payment


£1,690.00

Made to order. Full payment is taken at checkout. Production begins once payment is confirmed.

Pay by card, Apple Pay, Google Pay — or Klarna on eligible orders.

XYZ Racing Drift Spec Coilovers — Toyota TOWN ACE VAN 2022-2026

The Town Ace van was built to haul, not to slide. It sits tall, carries its mass high over soft commercial-van springing, and leans hard the moment you load the chassis – none of which helps when the goal is a held, controllable angle. The XYZ Racing Drift Spec coilover for the Toyota TOWN ACE VAN exists to rewrite that behaviour.

This is suspension designed specifically for drift, not a fast-road kit pressed into service. It drops the body, firms up the springing, and gives you the bump stroke to keep the platform composed mid-slide, so a van that was never meant to go sideways can be made to do it on purpose and repeatably.

What these coilovers do for your 2022-2026 Toyota TOWN ACE VAN

Lowering the Town Ace pulls its centre of gravity down and cuts the body roll that a tall van throws at you on turn-in. The firmer, drift-tuned spring and damper package keeps the chassis settled when you load it hard into a corner at speed, so the rear breaks away predictably instead of flopping onto its outside wheels. Setting ride height with the correct bump stroke leaves the suspension travel to work with at full lock, which is where drift control is won or lost. The result is a van body you can place, hold and adjust rather than fight.

About the Drift Spec coilover

XYZ Racing builds the Drift Spec specifically for competitive drifting rather than general road or track use. The design is aimed at stabilising the vehicle body through high-speed cornering so the driver can set and hold a clean angle, and the whole package is tuned to enhance drifting performance rather than ride comfort. The key idea is the relationship between ride height and bump stroke: drop the body, but keep enough usable travel, and the slide becomes something you steer with the chassis rather than only the throttle. That retained stroke after lowering is what XYZ credits for the controllability the Drift Spec is known for. It is a single-purpose kit, and the purpose is angle.

Fitment for the Toyota TOWN ACE VAN (2022-2026)

This kit is matched to the Toyota TOWN ACE VAN across the 2022 to 2026 model years. Confirm your van falls inside that year span before ordering, and check the spec against your exact variant below. Only the fitment details listed here are confirmed – if anything about your chassis differs, verify it first.

What buyers also search for

  • Toyota TOWN ACE VAN drift coilovers for competitive sliding and angle control
  • Toyota TOWN ACE VAN ride height drop with usable bump stroke retained
  • Drift Spec coilover upgrade that tames body roll on a tall van platform
  • Toyota TOWN ACE VAN suspension built for drift rather than load carrying

Pick the Drift Spec setup that matches your Town Ace and configure yours below.

This suspension is designed for Drift race especially. With its special design, it helps the racers stabilize the vehicle body while in high speed turning in order to make a perfect angle. It can also enhance drifting performance. After lowing the ride height with proper bump stroke, you will realize how we made the drift controlling to the excellent condition.

Top mounts included with your kit

Every XYZ Racing coilover kit ships with the upper mounts listed below for your exact chassis — no extra parts to source.

  • Pillow ball + rubber top mountPillow ball + rubberP+Pillow-ball upper with a rubber insert — adds steering precision and camber adjustability while keeping some of the factory mount’s harshness damping.
  • Hardened rubber top mountHardened rubberRHardened rubber upper — firmer than the factory bush for tighter response while retaining road-friendly noise and vibration isolation.
  • OE (factory) mount top mountOE (factory) mountOERetains the OEM (factory) upper mount — preserves the original ride comfort, noise and vibration behaviour for a stock-like feel.
Same car

Other products that fit this vehicle

Coilover ranges, brake kits and wheels for this car