XYZ Racing Racing Spec Coilovers — Pontiac SOLSTICE 2006-2010

The Kappa platform gives the PN01 Solstice double-wishbone geometry at both ends and a compact, rear-drive roadster chassis that responds to circuit inputs with genuine intent. Factory damping leaves headroom the chassis itself never gets to use – roll rates and compliance calibrated for comfort blunt the precision the geometry can theoretically deliver. The Racing Spec coilover closes that gap.

In GXP turbocharged form the Solstice generates enough cornering and braking forces to expose every weakness in the stock setup under sustained lap conditions. Even the base 2.4-litre variant, stripped back and run in time-attack trim, benefits from eliminating the factory compliance budget. These settings were derived from direct WTCC race event participation – the calibration reflects that lineage.

What this coilover does for your 2006-2010 Pontiac Solstice

Fitted to the PN01 chassis, the Racing Spec transforms how the Solstice’s double-wishbone suspension responds to load transfer under braking and mid-corner. Reduced body motion tightens the relationship between steering input and chassis response – on a car already noted for its feedback, the improvement registers immediately. Height adjustment lets you lower the centre of gravity and correct geometry after power or aero modifications, while the full damping range accommodates everything from a careful opening session to committed time-attack configuration.

About the Racing Spec coilover

XYZ’s Racing Spec is a dedicated motorsport damper – all calibration data gathered from direct participation in circuit racing, including WTCC events. This is not a road damper with circuit ambitions; the setup range and stiffness targets reflect serious track and time-attack use from the outset. For Solstice owners running modifications on par with factory-specification race vehicles or A-class competition builds, a custom-built version is available: supply XYZ with the details of every upgraded component on the car, plus the circuit or series in question, and the shock absorbers can be built to that specific brief. The catalogue specification is the starting point for most buyers – the custom route is there for the genuinely committed.

Fitment for the Pontiac Solstice (2006-2010)

Built for the Pontiac Solstice PN01 platform across the full 2006-2010 production run. Covers both the base 2.4-litre and the GXP 2.0-litre turbocharged variants. For cars running non-standard subframe or suspension geometry through competition modifications, verify fitment against your specific build before ordering.

What buyers also search for

• Pontiac Solstice PN01 suspension upgrade for time-attack and circuit competition
• Pontiac Solstice GXP coilover for track days and sprint events
• PN01 Kappa platform coilover with WTCC-derived damping calibration
• Pontiac Solstice Racing Spec dampers for seriously modified track cars
• Pontiac Solstice 2006-2010 coilover for dedicated circuit use

Pick your specification below – if the Solstice is running serious competition modifications, the custom brief option is noted in the configurator.