Skip to content

Gravel Rally

XYZ Racing Gravel Rally Coilovers — Mitsubishi MAGNA 2002-2004

SKU: MT32-GR

  • IncludesFull set of 4 (front + rear)
  • Spring rate (F/R)6 / 6 kg/mm
  • Top mountPillow ball + rubber / Hardened rubber / Aluminium
  • Lead time10–15 working days

Fits Mitsubishi MAGNA (2002-2004) chassis MT32

Front spring rate (kg/mm)

6 kg/mm recommended

The recommended rate is the factory setup for your exact car — leave it unless a suspension specialist has specified otherwise. Recommended: 6 kg/mm. A custom rate on this axle adds £80.00.

Rear spring rate (kg/mm)

6 kg/mm recommended

The recommended rate is the factory setup for your exact car — leave it unless a suspension specialist has specified otherwise. Recommended: 6 kg/mm. A custom rate on this axle adds £80.00.

Configured price£1,690.00Inc. VAT

Lead time: 10–15 working days from payment


£1,690.00

Made to order. Full payment is taken at checkout. Production begins once payment is confirmed.

Pay by card, Apple Pay, Google Pay — or Klarna on eligible orders.

XYZ Racing Gravel Rally Coilovers — Mitsubishi MAGNA 2002-2004

The Mitsubishi Magna’s long wheelbase and front-heavy V6 drivetrain make it a genuine gravel rally proposition for privateer and clubman competitors – but the stock suspension geometry, with its conservative travel and limited damping range, runs out of headroom the moment a stage surface turns rough. Flying crests, deep ruts, and loose camber changes demand a damper that absorbs real energy rather than deflecting it back into the car.

These XYZ Racing Gravel Rally coilovers for the Mitsubishi Magna 2002-2004 are built around an inverted damper architecture with long-stroke travel and matched long springs, developed specifically for the punishment of gravel-stage competition. Sandstone, silt, snow – these are the surfaces this kit was designed around.

What this coilover does for your 2002-2004 Mitsubishi Magna

The long-stroke design absorbs chassis vibration more effectively than the factory setup under the G-forces generated by high-speed gravel compressions, reducing the frequency with which the Magna’s front axle loses traction and wanders. On loose surfaces the tuned spring rates help keep the Magna’s nose from washing wide through fast corners, where the standard suspension’s rebound characteristics tend to leave the driver guessing. On severe high-speed bounces the increased travel window means the MT32 chassis stays settled rather than deflecting off-line. All spring rate settings were developed and tested in Rally Racing competition, not derived from road-car compromises.

About the Gravel Rally coilover

This is XYZ Racing’s gravel-specific damper variant, designed primarily for Rally Racing and Rally Cross – where road surface aggression is greater than in any other motorsport discipline. The inverted tube construction is the defining architectural choice: reversing conventional damper geometry positions the larger-diameter tube outward, where it resists stone strikes and structural flex, while the inner tube guides the piston precisely during rapid cycling over rough ground. Long-travel springs are matched to the damper stroke to handle the severe G-forces encountered in high-speed compression and hard braking on loose stages. The kit covers a range of surface types – from coarse sandstone to snow and silt – and the spring rate settings were validated against real Rally Racing conditions by XYZ Racing’s own competition programme.

Fitment for the Mitsubishi Magna (2002-2004)

This kit is built for the Mitsubishi Magna MT32 chassis, covering the 2002 to 2004 production years. Cross-check your build year against the chassis plate before ordering, as the Magna ran through closely spaced variants in this period.

What buyers also search for

  • Mitsubishi Magna MT32 gravel rally coilover for privateer and clubman stage events
  • Mitsubishi Magna 2002-2004 long-travel suspension for rough-surface competition
  • XYZ Racing Gravel Rally coilover for front-wheel drive V6 Magna builds
  • Mitsubishi Magna MT32 inverted damper kit for sandstone and silt stages

Configure this kit for your Magna build using the options below.

This damper is mainly design for Rally Racing or Rally Cross. In all racing events, road condition of Rally Cross is the most aggressive one. Hence, it means that the shock absorber is the most important utensil during the Rally gravel competition. We develop inverted tube design to meet each different road condition as sandstone, snow or silt. Long stroke and long spring which enable to absorb chassis vibration, aggressively attack from high speed bouncy road and bear extremely G-force when turning. All spring rate setting are tested by Rally Racing team.

Top mounts included with your kit

Every XYZ Racing coilover kit ships with the upper mounts listed below for your exact chassis — no extra parts to source.

  • Pillow ball + rubber top mountPillow ball + rubberP+Pillow-ball upper with a rubber insert — adds steering precision and camber adjustability while keeping some of the factory mount’s harshness damping.
  • Hardened rubber top mountHardened rubberRHardened rubber upper — firmer than the factory bush for tighter response while retaining road-friendly noise and vibration isolation.
  • Aluminium top mountAluminiumAAluminium upper mount — a stiff, lightweight housing that locates the damper precisely and resists flex under load.
Same car

Other products that fit this vehicle

Coilover ranges, brake kits and wheels for this car