XYZ Racing Pro Rally Coilovers — BMW X6 G06 4WD (NON AIR STRUT) (Cancellation Kit for Electronic Damping) 2019-2026

The G06 X6 is a 2,100kg crossover with a centre of gravity that has no business on a rally stage – which is exactly why the Pro Rally kit exists. This is the top-flight competition spec, built for gravel and snow stages where the standard adaptive air setup was never going to survive the first jump landing, let alone a season of them.

Critically, this is the cancellation-kit variant: it deletes the G06’s factory electronic damping and air-strut hardware entirely, replacing it with a fully mechanical, height-and-damper-adjustable system that doesn’t fight the original ECU or throw suspension fault codes on the dash. For an X6 being prepared for stage use, that mechanical simplicity is the point.

What this coilover does for your 2019-2026 Bmw X6 G06 4WD (NON AIR STRUT) (Cancellation Kit for Electronic Damping)

Rally-spec damping changes everything you feel through the seat. Where the factory air system is calibrated for refinement on tarmac, the Pro Rally is calibrated for compliance and recovery on loose, broken surfaces – the dampers absorb the first hit, settle the chassis, and have travel left in reserve for the second and third. On a heavy 4WD platform like the G06, that means the diffs get a stable contact patch to put torque through, instead of the front axle skating wide every time the surface changes.

Ride height adjustability lets you set the X6 up for the surface you’re running on – taller for gravel and snow clearance, lower if a stage transitions to sealed sections. The cancellation kit also frees you from the air system’s reliability ceiling, which on a competition car is the difference between finishing the rally and trailering it home.

About the Pro Rally coilover

XYZ Racing splits its rally gravel and snow suspension into two distinct philosophies, and the Pro Rally sits firmly in the second camp – the professional type, designed to be fitted after the car body itself has been modified for competition. This is not an off-the-shelf kit you bolt to a road-spec G06 on Sunday afternoon. It assumes the chassis has been prepared: reinforced mounting points, seam welding where stages demand it, and the geometry adjusted to accept rally-length travel.

The amateur variant in the XYZ catalogue fits straight to the original chassis with no body modification – that one is for stage-curious owners running organised events. The Pro Rally is the harder-edged sibling, intended for crews chasing championship points rather than a finish line photograph. Construction is geared toward repeat impact loading and rapid servicing between stages, which is how rally dampers earn their keep.

Fitment for the Bmw X6 (2019-2026)

This kit is built specifically for the G06 X6 with chassis code BM112-C, covering the 2019 through 2026 model years. It is the 4WD application and is the cancellation-kit version – it removes and replaces the factory non-air electronic damping hardware, so the original adaptive suspension module is taken out of the equation.

What buyers also search for

• Bmw X6 G06 rally coilover conversion for gravel and snow stages
• Pro Rally suspension for the X6 with electronic damping cancellation
• BM112-C chassis coilover for prepared rally cars
• G06 X6 height-adjustable coilover delete kit for the factory air strut
• 4WD X6 competition damper for repeat impact loading

Pick your damping spec and ride-height range below to configure the Pro Rally kit for your G06.