Skip to content

Pro Racing Drift Spec

XYZ Racing Pro Racing Drift Spec Coilovers — Volkswagen TIGUAN 4WD φ55 2007-2016

SKU: VO48-PRD

  • IncludesFull set of 4 (front + rear)
  • Spring rate (F/R)9 / 7 kg/mm
  • Top mountFront: Pillow ball + rubber / Hardened rubber · Rear: OE (factory) mount
  • Lead time10–15 working days

Fits Volkswagen TIGUAN 4WD φ55 (2007-2016) chassis VO48

Front spring rate (kg/mm)

9 kg/mm recommended

The recommended rate is the factory setup for your exact car — leave it unless a suspension specialist has specified otherwise. Recommended: 9 kg/mm. A custom rate on this axle adds £80.00.

Rear spring rate (kg/mm)

7 kg/mm recommended

The recommended rate is the factory setup for your exact car — leave it unless a suspension specialist has specified otherwise. Recommended: 7 kg/mm. A custom rate on this axle adds £80.00.

Configured price£3,390.00Inc. VAT

Lead time: 10–15 working days from payment


£3,390.00

Made to order. Full payment is taken at checkout. Production begins once payment is confirmed.

Pay by card, Apple Pay, Google Pay — or Klarna on eligible orders.

XYZ Racing Pro Racing Drift Spec Coilovers — Volkswagen TIGUAN 4WD φ55 2007-2016

The Tiguan 4WD’s raised, SUV-biased centre of gravity is the opposite of what drift set-ups usually start from, which is exactly why a Pro Racing Drift Spec build matters here: it drops ride height and locks the platform down before you ever think about throttle-steer angle. Volkswagen never intended this chassis to load its outer wheels through a sustained slide, so getting the body to stay flat and predictable through the transition is the whole job.

This kit is built specifically for competitive drifting, not fast-road comfort. On a 4WD Tiguan that means controlling body roll through the all-wheel-drive system’s extra unsprung mass while still letting the car rotate cleanly when you ask it to.

What this coilover does for your 2007-2016 Volkswagen Tiguan

Once fitted, the Tiguan sits lower and the body stays noticeably more settled through fast direction changes, which is the difference between a controllable slide and one that gets away from you. The 3-knob damping adjustment lets you set compression and rebound independently front and rear, so you can tune how quickly the chassis transfers load when you initiate an angle rather than fighting a set-up that’s either too soft to hold a line or too stiff to rotate. Lowering the ride height also drops the roll centre, which on a tall 4WD SUV platform like this is where most of the stability gain actually comes from. Bump stroke has been set up specifically for controlled slide angles rather than daily-driving comfort, so the car stays composed under the kind of lateral load a drift run puts through the outer struts.

About the Pro Racing Drift Spec coilover

This design starts from a straightforward brief: stabilise the car’s body through high-speed direction changes so the driver can hold a clean angle rather than correct for chassis movement. The bump stroke is calibrated with that in mind, and once it’s set correctly on a car like the Tiguan, the difference in how the platform holds a line becomes obvious. Each unit uses a 3-knob adjustment layout built around a small-diameter oil passage design; on rough sections of track this can produce a faint noise as damping oil moves through the smaller passage, which is a normal characteristic of the design rather than a fault. The whole unit is built for circuit and track-day use, where repeated big inputs and kerb strikes are part of the job rather than an edge case, so it isn’t something to be concerned about when it happens.

Fitment for the Volkswagen Tiguan (2007-2016)

Built to the VO48 chassis code for the 4WD, φ55 strut-diameter Tiguan produced across the 2007-2016 run. Confirm your Tiguan is the 4WD variant before ordering, since this kit is specific to that drivetrain and strut diameter rather than the 2WD version.

What buyers also search for

  • Volkswagen Tiguan 4WD drift coilover set-up for track and competition use
  • Tiguan Pro Racing Drift Spec damping adjustment for controlling body roll
  • Volkswagen Tiguan lowered suspension for circuit drift events
  • VO48 chassis coilover kit for competitive drift builds

Get the ride height and damping range that suits your Tiguan’s drift set-up, then configure yours below.

This suspension is especially designed for Drift racing purpose. With its special design, it helps the racers stabilize the vehicle body while in high speed turning in order to make a perfect angle. It can also enhance drifting performance. After lowering the ride height with proper bump stroke, you will realize how we made the drift controlling to the excellent condition.

Because its 3 adjustment knobs with small oil hole design, when driving through big bumps, the coilover oil will go through small passage which might cause some small noise. This is normal situation. This product is made for circuit tracks and there will be no concern for bumps on the tracks.

Top mounts included with your kit

Every XYZ Racing coilover kit ships with the upper mounts listed below for your exact chassis — no extra parts to source.

Front

  • Pillow ball + rubber top mountPillow ball + rubberP+Pillow-ball upper with a rubber insert — adds steering precision and camber adjustability while keeping some of the factory mount’s harshness damping.
  • Hardened rubber top mountHardened rubberRHardened rubber upper — firmer than the factory bush for tighter response while retaining road-friendly noise and vibration isolation.

Rear

  • OE (factory) mount top mountOE (factory) mountOERetains the OEM (factory) upper mount — preserves the original ride comfort, noise and vibration behaviour for a stock-like feel.
Same car

Other products that fit this vehicle

Coilover ranges, brake kits and wheels for this car