Skip to content

XYZ Racing · Made-to-order · UK shipping

Toyota VIOS XP90 TYPE 2 (Front top mount w/o bolts) 2007-2013 — Coilovers

The XP90 Vios left the factory tuned for comfort and economy, not control, so its tall, soft suspension lets the nose dive under braking and the body lean hard through a quick direction change. This XYZ Racing coilover range for the 2007-2013 Toyota VIOS XP90 TYPE 2 replaces that compliance with adjustable ride height and damper-controlled body movement, sharpening a light front-drive sedan without making it brittle.

Because this platform has spent years as the basis of one-make grassroots racing in its home markets, there is a genuine ladder of intent in this listing. Six type options – from Super Sport through to Circuit Master – let you match the kit to how the car is actually used, whether that is a firmer fast-road setup or a full circuit build.

What this coilover does for your 2007-2013 Toyota VIOS XP90 TYPE 2

Lowering the XP90 on a proper coilover drops the centre of gravity and tightens the front-end response that the standard struts blur. Adjustable ride height lets you set stance and, more usefully on a nose-heavy front-driver, balance corner weights so the inside front works harder out of slow turns. Firmer, adjustable damping holds the body flat through the torsion-beam rear’s natural lift and keeps the front tyres planted under trail-braking, where the factory car simply runs out of travel. The result is a Vios that turns in cleanly, settles faster over mid-corner bumps, and gives you a consistent platform to build alignment and tyre choice around.

About the XYZ Racing coilover range

Each kit in this family is a full coilover assembly – spring, damper and threaded body in one unit – rather than a lowering spring on a standard strut. Ride height is set on the threaded lower mount, and the dampers are adjustable so you can move between street compliance and track stiffness on the same hardware. The type names map to use case: Super Sport leans toward fast road, Top Sport and Circuit Master toward track work, Racing Spec toward circuit competition, with Tarmac Rally and Drift Spec covering their named disciplines. All six share the same XP90 fitment below, so the decision is purely about spring and damper intent, not whether the kit bolts to your car.

Fitment for the Toyota VIOS XP90 TYPE 2 (2007-2013)

This range fits the second-generation XP90 Vios, chassis reference TO58, across the 2007 to 2013 model years. It is the TYPE 2 specification with a front top mount supplied without bolts – confirm your existing front upper hardware against that note before ordering.

What buyers also search for

  • Toyota VIOS XP90 coilovers for fast road and grassroots circuit use
  • XP90 Vios suspension upgrade to cut body roll and brake dive
  • Adjustable height and damping coilovers for the 2007-2013 Vios sedan
  • Toyota Vios TYPE 2 front top mount coilover fitment, 2007 to 2013
  • Vios XP90 track day setup with corner-weight adjustment

Pick the spec that matches how your Vios is driven and configure yours below.

Same vehicle, other parts

Other items for your 2007-2013 Toyota VIOS XP90 TYPE 2 (Front top mount w/o bolts)