XYZ Racing · Made-to-order · UK shipping

Toyota RAV4 XA50 2/4WD 2018-2025 — Coilovers

The RAV4 XA50 carries its mass high, and the factory damping was tuned for a soft motorway gait rather than body control – so it leans early in corners, dives under braking, and floats over crests at speed. A coilover kit is the single change that addresses all of that at once, replacing the comfort-biased struts with adjustable units that let you set both ride height and damping to suit how you actually drive this car.

This is the family page for the full XYZ Racing coilover line-up for the 2018-2025 Toyota RAV4 XA50 in 2WD and 4WD form. Six specs sit underneath it – Super Sport, Top Sport, Racing Spec, Tarmac Rally, Drift Spec and Circuit Master – so you can pick the kit that matches a lowered fast-road stance, a firmer back-road setup, or a more serious track or rally build.

What this coilover kit does for your 2018-2025 Toyota RAV4 XA50 2/4WD

The most immediate change on the RAV4 XA50 is the wallow disappearing. Lowering the centre of gravity and adding spring rate cuts the body roll that makes a tall crossover feel nervous when you change direction quickly. Height adjustment lets you close the large factory wheel arch gap for a planted look without scraping on every kerb, and damping adjustment lets you firm things up for loaded driving or back the rebound off for a softer daily ride. Because the AWD versions of the XA50 sit heavier over the rear than the 2WD cars, being able to tune front and rear independently matters when you are balancing a hybrid AWD-i drivetrain or a torque-vectoring 4WD setup.

About the XYZ Racing coilover range

Every kit in the range runs height-adjustable threaded bodies and damping adjustment, so a single coilover covers everything from a mild drop to a committed track height. The spread of specs reflects different priorities: Super Sport leans toward fast-road usability, Top Sport stiffens things for harder driving, while Racing Spec, Tarmac Rally, Drift Spec and Circuit Master move progressively toward dedicated motorsport use with the spring and valving choices that go with it. Built to suit the weight and ride-height demands of the RAV4 XA50 rather than a generic strut, each spec gives you a defined adjustment window to set the car up around.

Fitment for the Toyota RAV4 XA50 2/4WD (2018-2025)

These coilovers are made for the XA50 RAV4 (chassis code TO82), covering the 2018 to 2025 model years in both 2WD and 4WD configurations. Confirm your drivetrain and model year against the spec selector before you order, as the kit is matched to this generation.