Skip to content

Gravel Rally

XYZ Racing Gravel Rally Coilovers — Toyota ARISTO JZS161 1997-2004

SKU: JZS161-GR

  • IncludesFull set of 4 (front + rear)
  • Spring rate (F/R)6 / 6 kg/mm
  • Top mountAluminium
  • Lead time10–15 working days

Fits Toyota ARISTO JZS161 (1997-2004) chassis JZS161

Front spring rate (kg/mm)

6 kg/mm recommended

The recommended rate is the factory setup for your exact car — leave it unless a suspension specialist has specified otherwise. Recommended: 6 kg/mm. A custom rate on this axle adds £80.00.

Rear spring rate (kg/mm)

6 kg/mm recommended

The recommended rate is the factory setup for your exact car — leave it unless a suspension specialist has specified otherwise. Recommended: 6 kg/mm. A custom rate on this axle adds £80.00.

Configured price£1,690.00Inc. VAT

Lead time: 10–15 working days from payment


£1,690.00

Made to order. Full payment is taken at checkout. Production begins once payment is confirmed.

Pay by card, Apple Pay, Google Pay — or Klarna on eligible orders.

XYZ Racing Gravel Rally Coilovers — Toyota ARISTO JZS161 1997-2004

The JZS161 Aristo carries its 2JZ-GTE twin-turbo straight-six well forward over the front axle, and that nose-heavy mass is the first thing a loose surface punishes. Sealed luxury saloon struts run out of travel almost as soon as the road turns to gravel, and the car starts skating on its bump stops instead of working the suspension. This XYZ Racing Gravel Rally coilover set exists for exactly that problem.

It is built for gravel-stage rally and rallycross rather than tarmac, with long-travel dampers and tall springs designed to keep all four corners loaded when the JZS161 is being driven hard across broken, low-grip ground. For anyone repurposing this 2JZ saloon as a stage or play car, it is the setup that lets the chassis breathe instead of crash.

What this coilover kit does for your 1997-2004 Toyota Aristo JZS161

The headline gain is usable travel. The long-stroke design soaks up the constant chassis vibration of a gravel surface and lets the rear axle keep driving instead of spinning up over every ridge and pothole. The inverted-tube damper construction puts the strong, large-diameter tube at the top where the side loads are highest, so the unit resists flex when you load it up mid-corner and lean on all 1,700-odd kilograms of Aristo. Tall, soft-by-tarmac-standards springs absorb high-speed impacts on a bouncy road and hold up under the heavy G-loading the JZS161 generates through faster turns. The result is a car that stays planted and predictable on sandstone, snow or silt rather than one that deflects off every rut.

About the Gravel Rally coilover

XYZ Racing positions the Gravel Rally as its dedicated loose-surface damper, developed specifically for rally and rallycross where the road conditions are the most aggressive in motorsport. The inverted-tube layout was chosen to cope with that variety of surfaces, from sandstone and silt through to snow. Long stroke and long spring length are the defining traits: together they absorb chassis vibration, let the car attack high-speed undulating ground, and carry the extreme cornering loads a stage car puts through its suspension. Every spring rate in the kit has been tested and signed off by XYZ Racing’s own rally team rather than picked from a generic catalogue, so the baseline you fit is a known starting point rather than guesswork.

Fitment for the Toyota Aristo JZS161 (1997-2004)

This kit is specced for the JZS161 Aristo built between 1997 and 2004, the twin-turbo 2JZ-GTE, rear-wheel-drive chassis. It is a direct fit for that platform across the model run. Confirm your exact chassis code before ordering so the spring and damper lengths match your car.

What buyers also search for

  • Toyota Aristo JZS161 gravel rally coilovers for loose-surface and rallycross use
  • Long-travel JZS161 suspension that keeps the rear axle driving on broken ground
  • 2JZ Aristo coilover kit with rally-team-tested spring rates
  • Inverted-tube damper upgrade for snow, silt and gravel stages

Pick your spring and damper spec for the JZS161 in the configurator below and build the kit to suit your car.

This damper is mainly design for Rally Racing or Rally Cross. In all racing events, road condition of Rally Cross is the most aggressive one. Hence, it means that the shock absorber is the most important utensil during the Rally gravel competition. We develop inverted tube design to meet each different road condition as sandstone, snow or silt. Long stroke and long spring which enable to absorb chassis vibration, aggressively attack from high speed bouncy road and bear extremely G-force when turning. All spring rate setting are tested by Rally Racing team.

Top mounts included with your kit

Every XYZ Racing coilover kit ships with the upper mounts listed below for your exact chassis — no extra parts to source.

  • Aluminium top mountAluminiumAAluminium upper mount — a stiff, lightweight housing that locates the damper precisely and resists flex under load.
Same car

Other products that fit this vehicle

Coilover ranges, brake kits and wheels for this car