XYZ Racing Pro Rally Coilovers — Renault CLIO 2.0 (TYPE 1) 2001-2005

The Clio 172’s torsion-beam rear axle and light tail make it one of the most willing front-drive cars to rotate on a loose surface, and that is the trait a rally setup has to manage rather than smother. The XYZ Racing Pro Rally coilover for the Renault CLIO 2.0 (TYPE 1) is built for top-flight gravel and snow competition, where wheel travel, damping control over ruts, and ride height for stage clearance matter more than outright stiffness.

This is competition rally hardware, not a fast-road lowering kit. It is designed to keep the F4R-powered Clio planted through compressions and landings on a broken stage, holding the contact patch when the surface is rutted, cambered, or covered in snow.

What this coilover does for your 2001-2005 Renault CLIO 2.0 (TYPE 1)

On a 2001-2005 Renault CLIO 2.0 (TYPE 1), the first thing you feel is composure over rough ground. Longer, better-controlled damper travel stops the inside rear from skipping when you load the car into a gravel hairpin, so the nose tucks in predictably instead of washing wide. Ride-height adjustment lets you raise the car for clearance on rutted stages or drop it for faster, smoother events. The damping keeps the Clio’s light rear settled under braking into broken corners, so it rotates when you ask rather than when a wheel drops into a hole.

About the Pro Rally coilover

The Pro Rally coilover is a dedicated loose-surface suspension, set up for the demands of gravel and snow rather than tarmac. XYZ Racing builds it in two installation forms. The amateur specification bolts straight to the original Clio shell, giving a competition-ready setup with no bodywork changes – the route most clubman and privateer crews take. The professional specification is intended to be fitted after the bodyshell has been modified, opening up additional travel and mounting options for a fully prepared stage car. Both share the long-travel, high-control damping that gravel work demands, where the suspension has to absorb impacts at speed while keeping the tyres loaded. Which one you run comes down to how far your Clio 2.0 build has gone and the regulations you compete under.

Fitment for the Renault CLIO 2.0 (TYPE 1) (2001-2005)

This kit is specified for the Renault CLIO 2.0 (TYPE 1), chassis code RE01, covering the 2001 to 2005 model years – the 2.0 16v Renault Sport Clio. Only the fitment details listed here are confirmed, so check your chassis code against the RE01 range before configuring.

What buyers also search for

• Renault Clio 2.0 Type 1 rally coilovers for gravel and snow stages
• Clio 172 competition suspension with ride-height adjustment for stage clearance
• RE01 Clio rally suspension in amateur bolt-in and professional bodyshell-prep specs
• Renault Clio 2.0 long-travel coilover setup for loose-surface rally events

Pick the amateur or professional Pro Rally specification for your Renault Clio 2.0 and build yours below.