
XYZ Racing Top Sport Coilovers — Nissan MARCH K10 1982-1992
SKU: K10-TS
- IncludesFull set of 4 (front + rear)
- Spring rate (F/R)18 / 4 kg/mm
- Top mountPillow ball + rubber / Hardened rubber / OE (factory) mount
- Lead time10–15 working days
Fits Nissan MARCH K10 (1982-1992) chassis K10
Added to basket ✓

The K10 March has stayed on track days and autosolo grids for four decades because the chassis is genuinely capable – featherlight at around 650kg, front-wheel drive with MacPherson struts up front, and a natural agility that made it the basis of a Japanese one-make racing series. Where the platform falls short is its factory suspension: engineered for compliance and city-car comfort, the original setup leaves the car floating and roll-heavy the moment you push it.
The XYZ Racing Top Sport coilover for the Nissan MARCH K10 addresses exactly that. Firmer spring rates, recalibrated damping, and the chassis finally uses its low mass as an advantage rather than letting factory vagueness blunt it.
What this coilover does for your 1982-1992 Nissan MARCH K10
At sub-700kg, the K10 responds to suspension changes more sharply than heavier machinery. The Top Sport runs spring rates 2kg/mm above a standard street setting, pulling the nose flat through corners and controlling the pitch under braking that the stock springs simply cannot manage. Damping sits 30-50% above a road baseline, absorbing the jolt of uneven surfaces and broken tarmac without transmitting shock through the chassis – so tyre contact stays consistent through the corner. On a FWD platform this light, that consistency matters most: the front axle handles steering and drive simultaneously, and any float or wheel hop costs both at once.
About the Top Sport coilover
The Top Sport occupies the middle ground between a comfort street coilover and a full competition setup – usable on the road day to day, calibrated for circuit work when required. XYZ Racing developed the tune through circuit testing, and the numbers reflect it: spring rates 2kg/mm above a street baseline and 30-50% firmer damping give the Top Sport a defined character rather than vague sporty claims. The firmer damping is calibrated specifically to absorb the impact of large surface irregularities, suppressing body movement and stabilising the chassis under aggressive inputs. For a car split between occasional track sessions and regular road use, that dual-purpose calibration is the point.
Fitment for the Nissan MARCH K10 (1982-1992)
This Top Sport coilover kit covers the Nissan MARCH K10 platform across the full 1982-1992 production span. The K10 chassis code identifies the complete first-generation March supermini. Verify your build year sits within that range before ordering.
What buyers also search for
- Nissan March K10 coilover kit for track day and daily road use
- K10 Micra suspension upgrade to reduce body roll on a lightweight FWD platform
- Nissan March 1982-1992 coilover replacement with uprated damping for aggressive driving
- XYZ Racing Top Sport coilover for the K10 March with firmer spring and damping calibration
A K10 running properly calibrated suspension feels like a different car. Configure yours below.
Top mounts included with your kit
Every XYZ Racing coilover kit ships with the upper mounts listed below for your exact chassis — no extra parts to source.
Pillow ball + rubberP+Pillow-ball upper with a rubber insert — adds steering precision and camber adjustability while keeping some of the factory mount’s harshness damping.
Hardened rubberRHardened rubber upper — firmer than the factory bush for tighter response while retaining road-friendly noise and vibration isolation.
OE (factory) mountOERetains the OEM (factory) upper mount — preserves the original ride comfort, noise and vibration behaviour for a stock-like feel.
Other products that fit this vehicle
Coilover ranges, brake kits and wheels for this car


