Skip to content

Pro Racing Drift Spec

XYZ Racing Pro Racing Drift Spec Coilovers — Mercedes-Benz C CLASS W204/S204 4 CYL 2007-2014

SKU: ME05-PRD

  • IncludesFull set of 4 (front + rear)
  • Spring rate (F/R)9 / 7 kg/mm
  • Top mountFront: Pillow ball + rubber · Rear: Aluminium
  • Lead time10–15 working days

Fits Mercedes-benz C CLASS W204/S204 4 CYL (2007-2014) chassis ME05

Front spring rate (kg/mm)

9 kg/mm recommended

The recommended rate is the factory setup for your exact car — leave it unless a suspension specialist has specified otherwise. Recommended: 9 kg/mm. A custom rate on this axle adds £80.00.

Rear spring rate (kg/mm)

7 kg/mm recommended

The recommended rate is the factory setup for your exact car — leave it unless a suspension specialist has specified otherwise. Recommended: 7 kg/mm. A custom rate on this axle adds £80.00.

Configured price£3,390.00Inc. VAT

Lead time: 10–15 working days from payment


£3,390.00

Made to order. Full payment is taken at checkout. Production begins once payment is confirmed.

Pay by card, Apple Pay, Google Pay — or Klarna on eligible orders.

XYZ Racing Pro Racing Drift Spec Coilovers — Mercedes-Benz C CLASS W204/S204 4 CYL 2007-2014

The W204/S204’s rear-drive layout and relatively short wheelbase make it a natural drift platform, but the factory suspension geometry is tuned for composure, not controlled slip. It settles the body too gently once you’re sideways, which costs you the ability to hold and adjust an angle mid-transition. The Pro Racing Drift Spec coilover exists specifically to fix that.

Built for competitive drifting rather than fast-road use, this kit lets you drop ride height and firm up the chassis so the C Class stops rolling through the transition and starts responding to the throttle instead. On a 4-cylinder W204 or wagon-bodied S204, that translates directly into more predictable angle control at the exit of a corner.

What this coilover does for your 2007-2014 Mercedes Benz C Class

Lowering the ride height on the W204/S204 tightens the roll centre and reduces the body movement that normally works against a drift car mid-slide, giving you a chassis that stabilises faster once you’ve committed to an angle. The 3-way adjustment allows you to firm up compression for high-speed transitions on a big track while keeping enough rebound control to catch the car cleanly on corner exit. Because the internals are tuned around proper bump stroke rather than road comfort, the C Class holds its line under the kind of lateral load that would otherwise unsettle the standard dampers. The net effect on a 4-cylinder W204 saloon or S204 estate is a car that turns lock-to-lock predictably, rather than one that snaps or washes out mid-drift.

About the Pro Racing Drift Spec coilover

This is a drift-specific design, not a repurposed track coilover. The valving is set up to stabilise the body through high-speed direction changes so the car holds a clean angle rather than wallowing through the transition, and the reduced ride height sharpens that response further once it’s dialled in. Each damper runs 3 adjustment knobs feeding oil through a deliberately small internal passage – a design choice that firms up low-speed damping precisely but can produce a faint noise over sharp bumps as oil moves through the restricted channel. That’s a by-product of the tuning, not a fault, and it’s a non-issue on the smooth, purpose-built circuit tracks this coilover is intended for. The whole set-up is built around one job: giving a drift car the body control to make a big angle look deliberate.

Fitment for the Mercedes Benz C Class (2007-2014)

This kit is built for the Mercedes Benz C Class W204/S204, 4-cylinder variants, covering the 2007 to 2014 model years. It applies to both the W204 saloon and the S204 estate body on the 4-cylinder platform – confirm your chassis code (ME05) against your registration before ordering to make sure you’re matching the correct generation.

What buyers also search for

  • Mercedes Benz C Class W204 drift coilover set-up for track days
  • W204/S204 ride height and angle control for competitive drifting
  • C Class 4-cylinder suspension built for sustained high-speed transitions
  • Mercedes Benz C Class drift-spec damping with 3-way adjustment

Get the angle control your W204 or S204 needs on track – configure yours below.

This suspension is especially designed for Drift racing purpose. With its special design, it helps the racers stabilize the vehicle body while in high speed turning in order to make a perfect angle. It can also enhance drifting performance. After lowering the ride height with proper bump stroke, you will realize how we made the drift controlling to the excellent condition.

Because its 3 adjustment knobs with small oil hole design, when driving through big bumps, the coilover oil will go through small passage which might cause some small noise. This is normal situation. This product is made for circuit tracks and there will be no concern for bumps on the tracks.

Top mounts included with your kit

Every XYZ Racing coilover kit ships with the upper mounts listed below for your exact chassis — no extra parts to source.

Front

  • Pillow ball + rubber top mountPillow ball + rubberP+Pillow-ball upper with a rubber insert — adds steering precision and camber adjustability while keeping some of the factory mount’s harshness damping.

Rear

  • Aluminium top mountAluminiumAAluminium upper mount — a stiff, lightweight housing that locates the damper precisely and resists flex under load.
Same car

Other products that fit this vehicle

Coilover ranges, brake kits and wheels for this car