Mazda 6 / ATENZA (GJ1-GL) 2012-2026 — Coilovers

The third-generation Mazda 6 – the GJ that later became the GL – was signed off at the factory for refinement, which in practice means soft damping, a tall ride and a clear lean the moment you load the front axle. This XYZ Racing coilover range gives the GJ1-GL chassis the body control its SkyActiv platform always had the bones for, with ride height and damping you set yourself rather than accept from the showroom.

The range spans six builds – Super Sport, Top Sport, Racing Spec, Tarmac Rally, Drift Spec and Circuit Master – covering everything from a firmer fast-road saloon to a dedicated competition car. Each kit is height-adjustable, so you can drop the nose-heavy front end and tighten the way this Mazda 6 / ATENZA (GJ1-GL) carries its mass through a corner.

What this coilover does for your 2012-2026 Mazda 6 / ATENZA (GJ1-GL)

Lower the GJ on its springs and the centre of gravity drops with it, so the front-end push that defines a hard-driven Mazda 6 arrives later and with more warning. Firmer, adjustable damping replaces the floaty factory rebound, so the car settles faster over mid-corner ruts and stops pattering under braking. Owners running the heavier diesel or the Tourer estate feel this most – both load the nose harder, and proper spring and damper control keeps that weight off the outside front tyre. Set the height to clear your driveway, then tune the firmness for the surface you actually drive on.

About the coilover range

XYZ Racing builds each kit around a threaded body and a height-adjustable lower mount, so ride height is set independently of spring preload on the GJ1-GL. The milder Super Sport and Top Sport options hold body control while keeping the everyday manners the platform is known for. Move up through Racing Spec and Circuit Master and the spring rates climb for sustained circuit loads, while Tarmac Rally and Drift Spec answer the specific demands of stage and competition use. Damper adjustment lets you match firmness to spring rate, tyre and road rather than living with one fixed setting.

Fitment for the Mazda 6 / ATENZA (GJ1-GL) (2012-2026)

These coilovers are built for the Mazda 6 / ATENZA on the GJ1-GL chassis, covering the 2012 to 2026 run from the original GJ through to the facelifted GL. Saloon and Tourer estate bodies share the platform. Confirm your model year and body style before ordering so the spec matches your car.

What buyers also search for

• Mazda 6 GJ1-GL suspension upgrade for road and track
• Mazda 6 / ATENZA coilover options for saloon and Tourer estate
• Mazda 6 coilovers to cut body roll and drop the stance
• Height-adjustable Mazda 6 GJ1-GL coilovers for the SkyActiv platform
• Mazda 6 ATENZA damping settings from fast road through to circuit

Six builds, one chassis – compare the Super Sport through to Circuit Master kits and configure yours below.