Skip to content

Pro Racing Gravel/Snow

XYZ Racing Pro Racing Gravel/Snow Coilovers — Lexus RX (XU30) 4WD 2003-2008

SKU: XU30-PRG

  • IncludesFull set of 4 (front + rear)
  • Spring rate (F/R)6 / 6 kg/mm
  • Top mountHardened rubber
  • Lead time10–15 working days

Fits Lexus RX (XU30) 4WD (2003-2008) chassis XU30

Front spring rate (kg/mm)

6 kg/mm recommended

The recommended rate is the factory setup for your exact car — leave it unless a suspension specialist has specified otherwise. Recommended: 6 kg/mm. A custom rate on this axle adds £80.00.

Rear spring rate (kg/mm)

6 kg/mm recommended

The recommended rate is the factory setup for your exact car — leave it unless a suspension specialist has specified otherwise. Recommended: 6 kg/mm. A custom rate on this axle adds £80.00.

Configured price£3,390.00Inc. VAT

Lead time: 10–15 working days from payment


£3,390.00

Made to order. Full payment is taken at checkout. Production begins once payment is confirmed.

Pay by card, Apple Pay, Google Pay — or Klarna on eligible orders.

XYZ Racing Pro Racing Gravel/Snow Coilovers — Lexus RX (XU30) 4WD 2003-2008

The XU30 Lexus RX was built to glide: soft springs, generous wheel travel and a tall body that leans hard on its outer corners the moment a surface turns loose. The Pro Racing Gravel/Snow coilover takes that same long-travel philosophy and arms it for competition, turning a comfort-biased AWD crossover into something that can be driven hard across gravel and snow without running out of suspension.

This is the rally end of the XYZ Racing range. Where a circuit kit chases outright stiffness, the Pro Racing Gravel/Snow chases travel and thermal headroom, the two things that keep a heavy 4WD car composed when the ground stops being smooth. For a 2003-2008 Lexus RX being prepared for loose-surface use, it is the spec that matches the job.

What this coilover does for your 2003-2008 Lexus RX (XU30) 4WD

On a tall, nose-heavy crossover like the RX, the first thing you feel is control over the body’s mass. The extended front and rear travel gives the dampers room to swallow crests, ruts and compressions that would bottom a shorter shock, so the car stays planted instead of skating wide. The larger oil volume and nitrogen charge keep damping consistent as a stage wears on, resisting the fade that leaves a soft SUV feeling vague after a few committed miles. Three-way adjustment lets you set bump and rebound for the grip under you, whether that is packed snow, loose gravel or a dry liaison. The result is a 4WD Lexus RX that turns in with intent and holds its line where the standard setup would float.

About the Pro Racing Gravel/Snow coilover

The Pro Racing Gravel/Snow is XYZ Racing’s rally and rallycross damper, designed from the outset for loose, low-grip surfaces rather than smooth tarmac. Its defining trait is travel: both front and rear units run a longer stroke than a road or circuit kit, building in a bigger buffer zone so the suspension keeps the car stable when it lands or compresses hard. To cope with sustained abuse, each damper carries an enlarged volume of suspension oil and nitrogen gas, spreading heat across more fluid and holding damping steady where a smaller shock would overheat and go off after prolonged use. Adjustment runs through three separate knobs, and the design uses a small oil-passage detail that can produce a faint noise over big hits as fluid moves through the restricted port – that is normal behaviour, not a fault. It is engineered for hard use on rough ground, where bumps are part of the job rather than something to be feared.

Fitment for the Lexus RX (XU30) 4WD (2003-2008)

This kit is cut for the second-generation Lexus RX on the XU30 chassis, covering the 2003 to 2008 model years in 4WD form. It is matched to the all-wheel-drive platform specifically, so confirm your car is an XU30 4WD before configuring. Spring and damper fitment is set for this chassis alone.

What buyers also search for

  • Lexus RX XU30 rally coilover built for gravel and snow stages
  • 2003-2008 Lexus RX 4WD long-travel suspension for loose-surface use
  • Lexus RX XU30 three-way adjustable coilover for rallycross
  • Lexus RX 4WD coilover with extra oil capacity to resist fade on long stages
  • XU30 Lexus RX suspension upgrade for rough roads and forest tracks

Set your ride height and damping to suit the stages you run, then configure your Pro Racing Gravel/Snow kit for the Lexus RX XU30 below.

This damper is mainly design for Rally Racing or Rally Cross. With longer travel for both front and rear, it increases bigger buffer distance to keep the car stable. The most advantages of this product is to extend the amount of suspension oil and nitrogen gas which can increase the stability of the shocks and prevent the shock oil temperature too high from being exhausted after long-term use.

Because its 3 adjustment knobs with small oil hole design, when driving through big bumps, the coilover oil will go through small passage which might cause some small noise. This is normal situation. This product is made for circuit tracks and there will be no concern for bumps on the tracks.

Top mounts included with your kit

Every XYZ Racing coilover kit ships with the upper mounts listed below for your exact chassis — no extra parts to source.

  • Hardened rubber top mountHardened rubberRHardened rubber upper — firmer than the factory bush for tighter response while retaining road-friendly noise and vibration isolation.
Same car

Other products that fit this vehicle

Coilover ranges, brake kits and wheels for this car