
Loose-surface stage work punishes a front-wheel-drive compact in ways tarmac never does, and the Kia Forte feels every bit of it: the nose carries the engine, the gearbox and most of the braking load, while the rear axle has to be coaxed into rotating across gravel and snow. The XYZ Racing Pro Rally coilover for the Kia Forte (2009-2017) is built for exactly that environment, where the surface changes mid-corner and the dampers have to keep working through ruts and compressions a B-road never serves up.
This is the competition end of the XYZ Racing range, not a lowering kit dressed up for the spec sheet. Pro Rally is aimed at top-flight rally competition, so the priority is survival and control over broken ground rather than a low static ride height.
What this coilover does for your 2009-2017 Kia Forte
On gravel and snow the Forte’s natural understeer is the enemy, and a stiffer, better-controlled platform is what lets you load the front, settle the car and get the rear to follow the line. Properly set up, this coilover keeps the wheels in contact through stage impacts so the FWD front axle can actually put its traction down rather than skating across the loose stuff. You get controlled body movement under heavy braking into a hairpin, the travel to absorb landings and crests, and a back end that rotates on lift rather than pushing wide. The result is a Forte that behaves like a stage car rather than a road car that has been lowered.
About the Pro Rally coilover
Pro Rally sits in XYZ Racing’s gravel and snow programme, a properly specialised competition suspension rather than a road-biased kit. It is offered in two fitment philosophies. The first is a direct-fit, amateur-grade configuration that mounts to the standard Kia Forte chassis with no bodywork changes, giving a club or privateer crew a serious stage setup without cutting the car. The second is a professional configuration intended to be fitted after the body has been modified, freeing up the travel and geometry a front-running competition build needs. Both target the same loose-surface job; the difference is how far you are prepared to take the car’s preparation.
Fitment for the Kia Forte (2009-2017)
This kit is specified for the Kia Forte, chassis code KI07, across the 2009 to 2017 model span. Confirm which route suits your build before ordering: the amateur configuration bolts to the original chassis untouched, while the professional configuration assumes the bodyshell has been prepared to accept it.
What buyers also search for
- Kia Forte rally suspension set up for gravel and snow stages
- Pro Rally coilovers for the KI07 Forte built to soak up stage impacts
- Kia Forte 2009-2017 competition suspension with a direct-fit or modified-body option
- Front-wheel-drive Forte handling tuned to rotate on loose surfaces
Choose your fitment route and configure your Pro Rally coilover setup for the Kia Forte below.
1. Be installed directly with the original chassis. (Amateur type)
2. Be installed after modifying the car body. (Professional type)
Top mounts included with your kit
Every XYZ Racing coilover kit ships with the upper mounts listed below for your exact chassis — no extra parts to source.
OE (factory) mountOERetains the OEM (factory) upper mount — preserves the original ride comfort, noise and vibration behaviour for a stock-like feel.
Other products that fit this vehicle
Coilover ranges, brake kits and wheels for this car
-
Super SportXYZ Racing Super Sport Coilovers — Kia FORTE 2009-2017
£990.00 inc. VATView → -
Top SportXYZ Racing Top Sport Coilovers — Kia FORTE 2009-2017
£1,190.00 inc. VATView → -
Tarmac RallyXYZ Racing Tarmac Rally Coilovers — Kia FORTE 2009-2017
£1,690.00 inc. VATView → -
Drag RacingXYZ Racing Drag Racing Coilovers — Kia FORTE 2009-2017
£1,690.00 inc. VATView →
