XYZ Racing · Made-to-order · UK shipping

Hafei SAIMA 2002-2026 — Coilovers

The Saima was Hafei’s Pininfarina-styled small car – light, front-wheel drive, and built around Mitsubishi-derived running gear. Its factory suspension was tuned for comfort and the road surfaces it was sold into, which leaves a clear gap for anyone wanting sharper turn-in or a lower, more planted stance. XYZ Racing coilovers for the Hafei Saima 2002-2026 close that gap with ride height and damping you set yourself.

Because this is a light FWD chassis, height and rebound control matter more than raw spring force – getting the nose to settle without crashing over broken tarmac is the whole job. This family page covers the full XYZ Racing range for the car, from fast-road Super Sport to circuit and drift-focused specs, so you pick the kit that matches how you actually drive it.

What these coilovers do for your 2002-2026 Hafei Saima

On a car this light, a height-adjustable coilover changes how the Saima carries speed through a corner. Dropping the centre of gravity cuts the body roll the soft factory setup allows, so the front tyres bite earlier and the nose stops washing wide under power. Independent height adjustment lets you correct the slightly nose-up factory rake and set a stance that both looks right and works on UK B-roads. With adjustable damping you trade the standard car’s float for control without making the ride brittle – which counts on a chassis that was never firm to start with.

About the coilover range

Each XYZ Racing coilover is a complete strut assembly – spring, damper and adjustable lower mount in one unit – replacing the Saima’s fixed-rate factory struts. Ride height is set on a threaded body, and the damper-adjustable specs let you tune the car to road or track. The range spans several characters: Super Sport for fast-road use, Top Sport for occasional track days, Racing Spec and Circuit Master for committed circuit work, Tarmac Rally for sealed-surface stage use, and Drift Spec for cars built to slide. They share the same threaded-body construction but differ in spring rate and damping intent, so the kit can suit a daily Saima or a dedicated build.

Fitment for the Hafei Saima (2002-2026)

These coilovers are built for the HA01-chassis Hafei Saima across the 2002 to 2026 model span. The kit fits in place of the factory front and rear struts on that platform. Confirm your exact variant in the configurator below before ordering.