XYZ Racing · Made-to-order · UK shipping

Fiat COUPE 1993-2000 — Coilovers

The Fiat Coupe carries most of its mass over the front axle, and on the five-cylinder 20v Turbo cars that bias shows up as push on corner entry and torque steer when you get back on the throttle. A coilover kit is the most direct way to take that balance back: control body roll, set the ride height, and stop the front end washing wide when you load it up. This XYZ Racing range covers the Tipo 175 Coupe across its full 1993 to 2000 run.

Because the platform spans a fast-road 2.0 16v through to the 220bhp 20v Turbo, the family is built out in several specs – Super Sport and Top Sport for road and track-day use, Racing Spec and Circuit Master for harder circuit work, plus Tarmac Rally and Drift Spec for owners chasing a particular discipline. You pick the kit to match how the car actually gets used.

What this coilover does for your 1993-2000 Fiat Coupe

Lowering the Coupe on adjustable spring platforms tightens the gap between tyre and arch and drops the centre of gravity, which is the single biggest lever against the car’s natural understeer. Damping adjustment lets you firm up the front to resist dive under braking while keeping enough compliance for British B-road surfaces. On the Turbo cars, better body control keeps the front tyres loaded more evenly, so you can deploy that five-cylinder torque earlier without the steering tugging at your hands. Set the corner heights properly and you also sharpen turn-in, giving this front-driven coupe a more neutral feel than it ever had from the factory.

About the XYZ Racing Coupe coilover range

Each kit pairs height-adjustable threaded bodies with damping adjustment, so ride height and damper firmness are set independently rather than locked together. The softer Super Sport and Top Sport specs prioritise a usable street ride with the range to stiffen up for occasional track days, while Racing Spec and Circuit Master move toward stiffer rates and tighter control for sustained circuit sessions. Tarmac Rally and Drift Spec exist for owners building toward those specific events. Across the range the design intent is the same: give the Fiat Coupe a wide, repeatable adjustment window so the car can be set for the surface and the use, then hold that setting reliably as values for these cars keep climbing.

Fitment for the Fiat Coupe (1993-2000)

This kit is built for the Fiat Coupe, chassis code FI04, covering the 1993 to 2000 model years across the 16v and 20v Turbo variants. Confirm your exact engine and year against the configurator so the correct spring rates and strut lengths are matched to your car.