XYZ Racing Pro Rally Coilovers — BYD F0 2008-2026

The Byd F0’s featherweight A-segment body and stubby wheelbase make it quick to change direction on tarmac, but point it at a loose gravel stage and the standard dampers run short on travel and control almost immediately. The XYZ Racing Pro Rally coilover for the Byd F0 is built for that exact environment: top-flight rally competition on gravel and snow, where usable wheel travel, damping that survives repeated impacts and the ability to absorb ruts matter far more than how low the car sits in a car park.

This is not a fast-road lowering kit. The Pro Rally sits at the competition end of the XYZ Racing range, set up for loose-surface stage work rather than smooth circuit laps. On a car as small and light as the F0, that means taming a chassis that pitches and skips easily, holding the front tyres into the dirt under braking, and keeping the rear settled over crests and through compressions.

What this coilover kit does for your 2008-2026 Byd F0

On gravel or snow, this setup gives the 2008-2026 Byd F0 the long, controlled wheel travel a loose surface demands, so the contact patches stay loaded over corrugations and landings instead of skating across the top. The damping is tuned to recover between hits, which keeps a light front-drive car from getting nervous when the surface turns rough mid-corner. Ride-height adjustment lets you lift the car for ground clearance over broken terrain, then fine-tune the attitude for the stage. The net result on the F0 is a chassis you can lean on with confidence when the grip is low and changing under you.

About the Pro Rally coilover

XYZ Racing builds the Pro Rally as a dedicated gravel and snow rally suspension, and it is offered in two installation specifications to suit how far a build has gone. The amateur specification is designed to bolt straight to the original F0 chassis, making it the entry point for owners running a near-standard shell. The professional specification is intended for cars whose bodyshell has already been modified for competition, where the mounting points and geometry have been reworked. Both are competition-grade pieces aimed at proper stage use, not cosmetic lowering, with the loose-surface damping and travel that gravel and snow rallying need. Pick the version that matches your car’s state of preparation.

Fitment for the Byd F0 (2008-2026)

This kit is matched to the Byd F0 on the BY01 chassis, covering the 2008 to 2026 production span. Confirm your chassis code and choose the amateur or professional installation specification depending on whether your shell is standard or already modified for competition.

What buyers also search for

• Byd F0 rally suspension upgrade for gravel and snow stages
• Byd F0 BY01 coilover kit with adjustable ride height for rough terrain
• Byd F0 Pro Rally coilovers for a standard or modified competition shell
• Loose-surface coilover damping for a lightweight front-wheel-drive rally car

Choose your amateur or professional installation spec and configure yours below.