
XYZ Racing Street Advanced Coilovers — BMW 3 SERIES E30 M3 φ51 (Front Welding OE Rear Separated) 1986-1991
SKU: BM091-SA
- IncludesFull set of 4 (front + rear)
- Spring rate (F/R)16 / 3 kg/mm
- Top mountFront: Pillow ball + rubber / Hardened rubber · Rear: Aluminium
- Lead time10–15 working days
Fits Bmw 3 SERIES E30 M3 φ51 (Front Welding OE Rear Separated) (1986-1991) chassis BM091
Added to basket ✓

The E30 M3’s S14 four-cylinder was built to rev past 6,750rpm on the way to a Group A homologation certificate, and the chassis underneath it was tuned to match – quick direction changes, a semi-trailing arm rear end that moves under load, and a nose that wants precise control rather than outright softness. XYZ Racing’s Street Advanced coilover for the BMW 3 Series E30 M3 (1986-1991) is built around that brief: full ride height and damping adjustment for drivers who want the S14’s character on the road with the option of a track day without swapping suspension first.
This φ51 kit keeps the factory-style layout at each end – the front strut housings are welded to a bespoke top section while the rear runs separate spring and damper units in the way the E30 originally left the factory – so the geometry the M3 was designed around stays intact. It’s a spec built for owners who want their coilovers to behave like the original suspension architecture, just with a much wider adjustment window than the factory setup ever offered.
What this coilover does for your 1986-1991 BMW 3 Series E30 M3 φ51 (Frt Welding OE Rr Separated)
720 damping combinations mean you can set the front firm enough to control the E30’s nose during trail-braking into a hairpin, then back it off for the drive home without unbolting anything. Independent ride height adjustment at each corner lets you correct the front-down stance many E30s pick up after decades on tired factory springs, and get the corner weights back where BMW intended them. Because the rear keeps separate spring and damper units rather than a combined design, you can run a firmer spring for track days while still isolating the semi-trailing arm bushes from harsh damper feedback on B-roads. The result on this chassis is a car that turns in with noticeably less roll than the standard setup allowed, without the ride quality collapsing into a jarring, track-only compromise.
About the Street Advanced coilover
Street Advanced is XYZ Racing’s most widely fitted range, refined over several seasons of development and run by racing teams worldwide before being signed off for retail. It sits between fast-road comfort and dedicated track hardware, aimed at owners who use the car daily or at weekends but also want to book the odd circuit day without changing suspension first. The core of the kit is 720 damping adjustment positions, giving a far finer window between soft and firm than a typical two-way or basic multi-way damper, so small changes at the adjuster translate into small, predictable changes at the wheel rather than big jumps. Construction follows XYZ’s usual monotube-based approach for consistent damping under sustained load, paired with height-adjustable spring perches so ride height and preload can be set independently of damping. For an E30 M3 owner, that combination means one coilover kit can cover a commute, a Sunday drive and a track day without a spring or damper swap in between.
Fitment for the BMW 3 Series E30 M3 φ51 (Frt Welding OE Rr Separated) (1986-1991)
This kit is specified for the BMW 3 Series E30 M3, chassis code BM09-1, across the full 1986 to 1991 production run. The φ51 front strut fits via a welded top section onto the OE housing, while the rear uses separate spring and damper units matching the E30’s original rear suspension layout – check your car’s rear end hasn’t already been converted to a combined unit before ordering.
What buyers also search for
- BMW E30 M3 coilover upgrade for road and occasional track use
- BMW 3 Series E30 M3 Street Advanced damping that suits daily driving and weekend circuit days alike
- BMW E30 M3 φ51 front strut coilover with OE-style separated rear spring and damper
- BMW 3 Series E30 M3 ride height correction for tired factory suspension
- BMW E30 M3 suspension setup with independently adjustable ride height and damping
Configure your BM09-1 φ51 kit – pick your ride height, spring rate and damping range for your E30 M3 below.
After tested in famous worldwide races, it reaches the ultimate quality and performance.
Street Advance is made especially for normal road use or track day. It comes with 720 damping adjusting way to satisfy your request. It is indispensable equipment for drivers aspiring speed and controlling.
Top mounts included with your kit
Every XYZ Racing coilover kit ships with the upper mounts listed below for your exact chassis — no extra parts to source.
Front
Pillow ball + rubberP+Pillow-ball upper with a rubber insert — adds steering precision and camber adjustability while keeping some of the factory mount’s harshness damping.
Hardened rubberRHardened rubber upper — firmer than the factory bush for tighter response while retaining road-friendly noise and vibration isolation.
Rear
AluminiumAAluminium upper mount — a stiff, lightweight housing that locates the damper precisely and resists flex under load.
Other products that fit this vehicle
Coilover ranges, brake kits and wheels for this car
-
Super SportXYZ Racing Super Sport Coilovers — BMW 3 SERIES E30 M3 φ51 (Front Welding OE Rear Separated) 1986-1991
£990.00 inc. VATView → -
Top SportXYZ Racing Top Sport Coilovers — BMW 3 SERIES E30 M3 φ51 (Front Welding OE Rear Separated) 1986-1991
£1,190.00 inc. VATView → -
Drag RacingXYZ Racing Drag Racing Coilovers — BMW 3 SERIES E30 M3 φ51 (Front Welding OE Rear Separated) 1986-1991
£1,690.00 inc. VATView → -
Tarmac RallyXYZ Racing Tarmac Rally Coilovers — BMW 3 SERIES E30 M3 φ51 (Front Welding OE Rear Separated) 1986-1991
£1,690.00 inc. VATView → -
Pro RallyXYZ Racing Pro Rally Coilovers — BMW 3 SERIES E30 M3 φ51 (Front Welding OE Rear Separated) 1986-1991
£6,000.00 inc. VATView → -
Drift SpecXYZ Racing Drift Spec Coilovers — BMW 3 SERIES E30 M3 φ51 (Front Welding OE Rear Separated) 1986-1991
£1,690.00 inc. VATView → -
Pro Racing Drift SpecXYZ Racing Pro Racing Drift Spec Coilovers — BMW 3 SERIES E30 M3 φ51 (Front Welding OE Rear Separated) 1986-1991
£3,390.00 inc. VATView →