Skip to content

Pro Rally

XYZ Racing Pro Rally Coilovers — BMW 2 SERIES F45/F46 (Cancellation Kit for Electronic Damping) 2014-2026

SKU: BM119C-PR

  • IncludesFull set of 4 (front + rear)
  • Top mountPillow ball + rubber / Hardened rubber / OE (factory) mount
  • Lead time10–15 working days

Fits Bmw 2 SERIES F45/F46 (Cancellation Kit for Electronic Damping) (2014-2026) chassis BM119C

Lead time: 10–15 working days from payment


£6,000.00

Made to order. Full payment is taken at checkout. Production begins once payment is confirmed.

Pay by card, Apple Pay, Google Pay — or Klarna on eligible orders.

XYZ Racing Pro Rally Coilovers — BMW 2 SERIES F45/F46 (Cancellation Kit for Electronic Damping) 2014-2026

The F45 and F46 sit apart from the rest of BMW’s 2 Series range: a transverse engine, UKL2 underpinnings and a front-led weight bias rather than the rear-drive coupe layout the badge usually conjures. Many of these cars left the factory running electronic adaptive dampers, which is precisely why this version of the XYZ Racing Pro Rally coilover is supplied as a cancellation kit for the electronic damping – it lets you remove the factory adaptive struts without leaving a fault light glowing on the dash or the car defaulting to its stiffest map.

Pro Rally is XYZ Racing’s gravel and snow competition specification, set up for loose-surface stage work rather than smooth circuit tarmac. On a tall, front-biased Active Tourer or Gran Tourer that matters: the standard setup runs short on travel and damper authority over ruts, crests and compressions, and this kit is built to keep the body planted where the original electronics give up.

What this coilover does for your 2014-2026 Bmw 2 Series F45/F46

Swapping to the Pro Rally kit gives you full control over ride height and a damping range chosen for unsealed surfaces instead of motorway comfort. The cancellation element removes the electronic damper signal cleanly, so the dash stays quiet and the suspension behaves exactly as set rather than fighting a control module. On the nose-heavy F45/F46 body, the firmer rate and longer usable stroke curb the pitch and dive that the tall MPV shell is prone to, and give the front axle a consistent contact patch when you load it into a loose bend. The result is a car that takes big inputs without crashing through its travel.

About the Pro Rally coilover

The Pro Rally is a dedicated gravel and snow competition damper, and XYZ Racing builds it in two configurations to suit how seriously the car has been prepared. The first is an amateur-level fit that bolts straight to the original chassis with no bodywork changes, keeping a stage-ready 2 Series F45/F46 close to standard. The second is the professional setup, intended for cars whose body has been modified to accept the suspension, freeing up more travel and mounting flexibility for top-flight rally use. Both run the cancellation hardware needed to defeat the factory electronic damping, so the platform reads as conventional passive suspension once fitted. It is loose-surface kit first and foremost – chosen for grip and composure on gravel and snow rather than smooth tarmac pace.

Fitment for the Bmw 2 Series F45/F46 (2014-2026)

This kit is specified for the BMW 2 Series F45 and F46 under chassis code BM119-C across the 2014 to 2026 production span. It is the cancellation-kit variant, so it suits cars originally fitted with electronic adaptive damping. Confirm your chassis code and damper specification against your own car before configuring.

What buyers also search for

  • BMW 2 Series F45/F46 gravel and snow rally coilover conversion
  • 2 Series F45 electronic damping cancellation kit for coilovers
  • F46 Gran Tourer rally suspension for loose-surface stages
  • BMW 2 Series coilover that disables factory adaptive dampers
  • Pro Rally competition coilovers for the 2014-2026 2 Series

Set your spec and choose between the direct-fit and modified-body configurations in the configurator below.

Rally gravel/snow suspensions are very professional suspensions and they are designed into two types:

1. Be installed directly with the original chassis. (Amateur type)
2. Be installed after modifying the car body. (Professional type)

Top mounts included with your kit

Every XYZ Racing coilover kit ships with the upper mounts listed below for your exact chassis — no extra parts to source.

  • Pillow ball + rubber top mountPillow ball + rubberP+Pillow-ball upper with a rubber insert — adds steering precision and camber adjustability while keeping some of the factory mount’s harshness damping.
  • Hardened rubber top mountHardened rubberRHardened rubber upper — firmer than the factory bush for tighter response while retaining road-friendly noise and vibration isolation.
  • OE (factory) mount top mountOE (factory) mountOERetains the OEM (factory) upper mount — preserves the original ride comfort, noise and vibration behaviour for a stock-like feel.
Same car

Other products that fit this vehicle

Coilover ranges, brake kits and wheels for this car