Skip to content

Top Sport

XYZ Racing Top Sport Coilovers — Audi TT 8S 4WD φ55 2015-2026

SKU: AU47-TS

  • IncludesFull set of 4 (front + rear)
  • Spring rate (F/R)18 / 4 kg/mm
  • Top mountFront: Pillow ball + rubber / Hardened rubber · Rear: OE (factory) mount
  • Lead time10–15 working days

Fits Audi TT 8S 4WD φ55 (2015-2026) chassis AU47

Front spring rate (kg/mm)

18 kg/mm recommended

The recommended rate is the factory setup for your exact car — leave it unless a suspension specialist has specified otherwise. Recommended: 18 kg/mm. A custom rate on this axle adds £80.00.

Rear spring rate (kg/mm)

4 kg/mm recommended

The recommended rate is the factory setup for your exact car — leave it unless a suspension specialist has specified otherwise. Recommended: 4 kg/mm. A custom rate on this axle adds £80.00.

Configured price£1,190.00Inc. VAT

Lead time: 10–15 working days from payment


£1,190.00

Made to order. Full payment is taken at checkout. Production begins once payment is confirmed.

Pay by card, Apple Pay, Google Pay — or Klarna on eligible orders.

XYZ Racing Top Sport Coilovers — Audi TT 8S 4WD φ55 2015-2026

The TT 8S’s Haldex-controlled quattro system only sends power rearward once the front axle has already started to slip, which means the nose does most of the initial work when you turn in hard on track – and the factory dampers, tuned mostly for ride comfort, let that nose dive and roll under load. The XYZ Racing Top Sport coilover for the Audi TT 8S 4WD φ55 (2015-2026) is built to hold that front-loaded bias in check without turning the TT into a car you dread driving to the circuit.

Top Sport sits between XYZ’s road-focused Super Sport line and its full competition kit: damping and spring rates are lifted well above street settings, but the ride stays liveable for the motorway leg of a track day. On a chassis this compact, with a short wheelbase and a low centre of gravity, that extra control shows up immediately – less float over compressions, less delay before the rear axle picks up its share of the load.

What this coilover does for your 2015-2026 Audi TT 8S 4WD φ55

With damping and spring rates raised 30-50% over a street setup – or roughly 2kg/mm on the spring side, depending on configuration – body control through the TT’s MacPherson-strut front end tightens up under trail braking, cutting the nose-dive that eats into steering precision on turn-in. Better control of the shock body’s own movement keeps the tyre’s contact patch loaded more evenly over kerbs and mid-corner bumps, which on a quattro car matters twice over: the Haldex system can only send torque to grip that’s actually there. Big hits – a crest taken at speed, a badly cambered apex – get absorbed rather than kicked through to the chassis, so the TT stays settled instead of stepping wide. Day to day, the same control shows up as less roll pulling out of roundabouts and a flatter transition when the quattro system hands torque to the rear under power.

About the Top Sport coilover

XYZ’s Top Sport range starts from a street-biased base setting and steps damping force up by 30 to 50 percent, or adds around 2kg/mm to the spring rate, depending on the configuration chosen. That extra firmness isn’t just stiffness for its own sake – it’s set to control the shock body’s own movement under hard inputs, so the piston isn’t fighting itself the moment you hit a compression mid-corner. Sharper hits, like a broken apex kerb or a dip taken at speed, get absorbed rather than transmitted straight into the chassis, which keeps the tyre’s contact patch doing its job instead of skipping. What that means for an Audi TT driver is more consistent grip and a car that holds its line as load shifts, rather than one that wanders. XYZ draws these settings from its own Top Sport racing programme, then eases them back just enough that the kit stays usable on the road – a spec built for track day and aggressive driving, not a dedicated competition car.

Fitment for the Audi TT 8S 4WD φ55 (2015-2026)

This kit is spec’d for the Audi TT 8S 4WD φ55, chassis code AU47, covering the full model run from 2015 through to 2026. It’s built specifically around the Haldex-based quattro platform rather than the front-wheel-drive TT, so confirm your car carries all-wheel drive before ordering.

What buyers also search for

  • Audi TT 8S quattro suspension upgrade for road and occasional track use
  • Audi TT 8S coilover damping that holds up over repeat track sessions
  • Top Sport coilovers for the Audi TT AU47 chassis with adjustable ride height
  • Audi TT 4WD suspension setup for reducing nose-dive under trail braking
  • XYZ Racing Top Sport kit for Audi TT fast-road and track day driving

Every Top Sport kit for the TT 8S is built to order against your exact spec – pick your damping and spring configuration in the configurator below.

By increasing 30~50% damping or 2kg/mm spring rate than street setting; it can absorb the impact of uneven pavement. It is able to absorb the jolt when across a big bumps, effectively suppress shock body and to increase tire’s traction. Vehicle stability makes you can experience perfect handling. All the settings from our Top Sport racing experience. It is suitable for track day and aggressive driving.

Top mounts included with your kit

Every XYZ Racing coilover kit ships with the upper mounts listed below for your exact chassis — no extra parts to source.

Front

  • Pillow ball + rubber top mountPillow ball + rubberP+Pillow-ball upper with a rubber insert — adds steering precision and camber adjustability while keeping some of the factory mount’s harshness damping.
  • Hardened rubber top mountHardened rubberRHardened rubber upper — firmer than the factory bush for tighter response while retaining road-friendly noise and vibration isolation.

Rear

  • OE (factory) mount top mountOE (factory) mountOERetains the OEM (factory) upper mount — preserves the original ride comfort, noise and vibration behaviour for a stock-like feel.
Same car

Other products that fit this vehicle

Coilover ranges, brake kits and wheels for this car