XYZ Racing Top Sport Coilovers — Audi RS3 SEDAN 8V φ55 2013-2020

The RS3 Sedan 8V carries its quattro driveline hardware and turbocharged five-cylinder ahead of the front axle, loading the nose harder under trail-braking than the front-drive A3 it’s built from. XYZ Racing’s Top Sport coilover kit is built around that weight bias, raising spring rate and damping over the standard set-up so the front end resists dive without turning harsh on the road.

This is the spec for owners splitting their year between the daily commute and the odd track day – not a full race set-up, but a meaningful step up in body control the moment the road turns.

What this coilover does for your 2013-2020 Audi RS3 Sedan

Fitted to your RS3, the Top Sport kit’s raised spring rate keeps the nose planted when you brake late into a corner, cutting the dive that unsettles the quattro system’s ability to put power down cleanly on the way out. The firmer damping curve controls body roll through direction changes without transmitting every ridge in the tarmac straight into the cabin, useful on UK B-roads where surface quality varies mid-corner. Ride height adjusts independently front and rear, so you can correct the RS3’s nose-down stance and get the corner weights back where they belong. On track, the extra control means less pitch under braking into fast turns, holding the front tyres flatter to the road when you need the grip most.

About the Top Sport coilover

XYZ Racing sets up the Top Sport range around 30-50% firmer on damping, or roughly 2kg/mm stiffer on spring rate, than its street-oriented coilovers – a step calibrated from the settings XYZ’s own racing programme runs, not a generic off-the-shelf multiplier. The stiffer spring absorbs the impact of rough or uneven road surfaces rather than letting the chassis pitch over it, and the damper is tuned to catch the jolt from a sharp bump before it unsettles the body, which keeps the tyre’s contact patch working instead of skipping. The combined effect is a car that holds its line through a corner with less roll and more predictable weight transfer, which is exactly what XYZ built this range for: a coilover that can handle a track day and aggressive road driving without a full race set-up’s trade-offs.

Fitment for the Audi RS3 Sedan 8V φ55 (2013-2020)

This kit is built specifically for the Audi RS3 Sedan, chassis code AU62, covering the 2013 to 2020 model years on the 8V platform’s φ55 strut diameter. Confirm your build year and strut spec against your RS3’s documentation before ordering, as the AU62 designation is specific to this fitment.

What buyers also search for

• Audi RS3 Sedan suspension upgrade for road and track use
• Audi RS3 8V coilover damping that holds up through repeat track day sessions
• Top Sport spring rate options for the Audi RS3 Sedan quattro chassis
• Audi RS3 AU62 ride height adjustment for a corrected stance
• Audi RS3 Sedan coilover kit for daily driving with occasional track use

Spec your Audi RS3 Sedan’s Top Sport coilover kit to match how you actually drive it – configure yours below.