XYZ Racing · Made-to-order · UK shipping

Audi Q8 4WD (Cancellation Kit for Electronic Damping) 2019-2026 — Coilovers

The Audi Q8 4WD leaves the factory on adaptive air suspension with electronic damping control, which is exactly what makes a coilover conversion on this chassis more involved than a straight bolt-on swap. This XYZ Racing coilover kit for the Audi Q8 4WD includes the cancellation kit for electronic damping, so the car’s suspension ECU still reads a valid signal and the dash stays clear once the OEM struts come off.

On a tall, two-tonne-plus SUV with a high roll centre, the gains from a fixed coilover setup show up straight away: a flatter platform, a lower ride height, and damping you set yourself rather than one a control module decides for you. The 2019-2026 Q8 runs on the AU59-C platform, and this kit is built around its strut geometry and ride-height window.

What this coilover does for your 2019-2026 Audi Q8 4WD

Drop the ride height and the Q8’s most obvious visual flaw – the wheel-arch gap on a body this large – closes up, and the centre of gravity comes down with it. Body roll through a motorway slip road or a fast B-road sweep is noticeably checked, so the nose stops heaving on turn-in and the rear settles quicker after a lane change. Height-adjustable spring platforms let you set the stance you want without wrecking ride quality, and moving away from the ageing air struts removes a known and costly failure point on higher-mileage cars. Where the chosen spec offers damping adjustment, you swap the factory’s automated comfort and sport modes for a fixed setting you tune once to your roads and load.

About the coilover range

This XYZ Racing coilover family for the Audi Q8 4WD spans seven specifications, from the fast-road Super Sport and Top Sport through the circuit-focused Racing Spec and Circuit Master to the Tarmac Rally, Pro Rally and Drift Spec builds. Every kit runs height-adjustable spring perches so you set the Q8’s ride height to suit stance or function, and every one ships with the electronic damping cancellation module the car’s standard adaptive setup needs. The road specs lean towards a usable street ride with tighter body control; the competition specs move to firmer rates and more aggressive damping for closed-circuit use. Choose by how the car is actually driven – a road-biased Q8 points at the Super Sport or Top Sport, harder use towards the Racing Spec or Circuit Master. All seven share the same AU59-C fitment and the same cancellation hardware.

Fitment for the Audi Q8 4WD (2019-2026)

This kit fits the Audi Q8 4WD on the AU59-C platform across the 2019 to 2026 model years. It is the quattro four-wheel-drive version and includes the cancellation kit for electronic damping, so it suits cars that left the factory with the adaptive damping system. Check your build year against the range above before configuring.