Audi Q5 FY 4WD (Cancellation Kit for Electronic Damping) 2017-2026 — Coilovers

The second-generation Q5 FY shipped with optional electronic damping, and that single factory feature is what makes a coilover swap on this car trickier than on a passive-strut Audi. Pull the adaptive dampers off without telling the car, and the dash lights up with a chassis fault that never clears. This XYZ Racing coilover package for the Audi Q5 FY 4WD (2017-2026) bundles the electronic-damping cancellation kit precisely so that doesn’t happen.

What you get is full height and damping adjustment on a nose-heavy, tall, quattro-equipped SUV that carries most of its mass over the front axle and rolls more than its driver usually wants. The cancellation module emulates the signal the body-control module expects from the OEM units, so you keep a clean dash while taking direct control of how the car sits and how it’s damped.

What this coilover does for your 2017-2026 Audi Q5 FY 4WD

Lowering a Q5 FY of this size does more than change the look – it drops the centre of gravity on a vehicle that genuinely needs it, tightening turn-in and cutting the lazy body roll that comes standard on a near-1.8-tonne crossover. Adjustable damping lets you firm up the platform for B-road pace or back it off for motorway compliance, rather than living with the binary feel of the factory adaptive setup. Ride height adjustment gives you the stance most FY owners are after without dropping the car onto its bump stops. Because the kit retains the electronic-damping cancellation hardware, you keep the dash clear and the fault codes away while running a fully mechanical, driver-set suspension.

About the XYZ Racing coilover

XYZ Racing builds this range as a height-adjustable, damping-adjustable coilover system, sold across a spread of specifications – from the road-biased Super Sport and Top Sport through to circuit and competition setups such as Racing Spec, Circuit Master, Drift Spec, Tarmac Rally and Pro Rally. Each variant pairs a defined spring rate and valving philosophy with independent ride-height adjustment, so the same chassis kit can be set up for a fast-road Q5 or a track-leaning build. The defining feature for this fitment is the integrated cancellation kit for the FY’s electronic damping, which removes the need to retain the OEM adaptive struts. Construction follows XYZ’s standard adjustable-platform design, with the spring perch and damper body set up for repeated height and damping changes once the car is on the ground.

Fitment for the Audi Q5 FY 4WD (2017-2026)

This kit is built for the FY-chassis Audi Q5 4WD (internal reference AU50-C), covering the 2017 to 2026 model span. It is the variant intended for cars originally fitted with electronic damping control, and it includes the cancellation kit required to run aftermarket coilovers on those vehicles without triggering a suspension fault. Confirm your car left the factory with adaptive damping before ordering this specific version.

What buyers also search for

• Audi Q5 FY coilovers with electronic damping cancellation kit included
• Q5 FY 4WD suspension upgrade for lowering a quattro SUV without dash faults
• Audi Q5 FY adjustable coilovers for road and occasional track use
• 2017-2026 Q5 FY ride-height and damping control to cut body roll
• XYZ Racing coilover specs from fast-road to circuit for the Q5 FY

Pick the specification that matches how you drive your Q5 FY and configure yours below.