Skip to content

XYZ Racing · Made-to-order · UK shipping

Audi Q5 8R 4WD (Cancellation Kit for Electronic Damping) 2008-2017 — Coilovers

The Q5 8R carries its mass high and well forward, the longitudinal engine sitting ahead of the front axle line and the quattro driveline adding weight the factory dampers were tuned to cushion rather than control. On cars specified with Audi’s electronic damping, that soft calibration is locked to the OEM control module, which is why this kit ships with the cancellation hardware to retire the adaptive system cleanly and stop the dash fault that would otherwise follow.

These XYZ Racing coilovers replace that compromise with a fixed, properly valved setup for the 2008-2017 Q5 8R 4WD. Ride height comes down, the electronic damping warning stays away, and you get a platform you can set rather than one the car keeps deciding for you.

What this coilover does for your 2008-2017 Audi Q5 8R 4WD (Cancellation Kit for Electronic Damping)

Drop the 8R’s ride height and the first thing you notice is how much less the body leans into a roundabout or a motorway slip road – pulling the centre of gravity down on a tall quattro crossover pays back immediately in roll control. Threaded spring perches let you set corner height to suit how the car is loaded, which matters on a vehicle that carries weight and occasionally tows. Spring and damper rates firmer than standard tighten the vertical float that makes the stock Q5 wallow over crests, without turning a usable road car into something punishing on a UK B-road. The cancellation kit keeps the electronic damping light off, so the dashboard reads clean after install. The net result is a Q5 that changes direction with intent instead of settling and waiting.

About the XYZ Racing coilover range

The XYZ Racing coilover range for the Q5 8R spans seven build specifications, from Super Sport and Top Sport for fast-road and occasional track use through to Racing Spec, Circuit Master, Tarmac Rally, Pro Rally and Drift Spec for harder competition duty. Each shares a height-adjustable threaded body and a damper valved to a defined rate rather than the variable factory map. The electronic damping cancellation kit is integral to this fitment – it emulates the OEM adaptive dampers electrically so the control module sees the load it expects and logs no fault. Construction is built around a serviceable coilover body with adjustable lower mounts, letting you separate ride height from spring preload. Which specification suits you comes down to use: the road-biased options keep compliance for daily driving, while the rally and circuit options prioritise body control and stiffer rates.

Fitment for the Audi Q5 8R 4WD (Cancellation Kit for Electronic Damping) (2008-2017)

This fitment is specific to the Audi Q5 8R 4WD running the factory electronic damping system, covering the 2008 to 2017 model years. The included cancellation kit is required on these cars to disable the OEM adaptive dampers and clear the associated warning. Confirm your Q5 was originally specified with electronic damping before ordering, since that is exactly what this kit addresses.

What buyers also search for

  • Audi Q5 8R coilovers with electronic damping cancellation built in
  • Lowering the 2008-2017 Q5 8R 4WD without triggering the adaptive damper fault
  • Height-adjustable Audi Q5 suspension for road, fast-road and track setups
  • Choosing between Super Sport, Top Sport and Circuit Master spec for the 8R
  • Q5 8R quattro coilover upgrade that controls body roll on a tall SUV

Pick the specification that matches how you drive the Q5 8R and configure yours below.

Same vehicle, other parts

Other items for your 2008-2017 Audi Q5 8R 4WD (Cancellation Kit for Electronic Damping)