XYZ Racing Drag Racing Coilovers — Audi A5 B8 COUPE (Cancellation Kit for Electronic Damping) 2007-2016

The B8 A5 Coupe carries its mass well forward of the front axle line, and on a hard launch that nose-heavy quattro layout is the first thing working against you for traction. The XYZ Racing Drag Racing coilover for the Audi A5 B8 Coupe is built to manage that weight rather than simply drop the car: its damping is set up to let the chassis shift load rearward off the line so the driven tyres bite instead of scrabbling.

This is the cancellation-kit version, intended for B8 A5 cars that left the factory with electronic adaptive damping. The kit lets you remove the OE adaptive struts without the suspension ECU logging a fault, so the dash stays clean while you run a fixed drag setup tuned for 0-400 work.

What this coilover does for your 2007-2016 Audi A5 B8 Coupe

On the strip you feel the rear squat and the nose lighten exactly when you want it, the instant you drop the clutch or the box grabs first. That deliberate weight transfer presses the driven tyres into the tarmac and cuts the wheelspin that costs you the first sixty feet. Through the back half of the run the same setup keeps the car settled and tracking straight as speed climbs, where a softer factory damper would float. Ride height is fully adjustable, so you can set squat and rake to match your tyre and your launch technique.

About the Drag Racing coilover

XYZ Racing builds the Drag Racing series specifically for 0-400 metre acceleration, with settings for front-, rear- and four-wheel-drive cars. The damping logic is the whole point: it is tuned to move weight between the front and rear axles during launch and the run, forcing the driven tyre into greater compression so it loads up and grips rather than lighting up. Reducing that wheel idle time is what sharpens the response off the line and steadies the car as it gathers high speed. This is a focused, single-purpose setup, not a fast-road compromise, and the A5 application includes the electronic damping cancellation hardware so it suits a car originally specified with adaptive struts.

Fitment for the Audi A5 B8 Coupe (2007-2016)

This kit fits the B8 A5 Coupe (chassis AU23-C) across the 2007 to 2016 model run. It is the variant for cars equipped with factory electronic damping, supplied with the cancellation kit so the adaptive suspension warning stays clear once the OE dampers come out.

What buyers also search for

• Audi A5 B8 quattro drag coilovers for launch traction
• B8 A5 Coupe coilovers with electronic damping cancellation kit
• Audi A5 2007-2016 drag racing suspension for 0-400 metre runs
• Adjustable ride height drag coilovers for strip use

Set your launch height and rake to suit the car, then configure yours below.