XYZ Racing · Made-to-order · UK shipping

Audi A5 B8 COUPE (Cancellation Kit for Electronic Damping) 2007-2016 — Coilovers

Pull the factory adaptive struts out of a B8-generation Audi A5 Coupe and the cluster lights up: the suspension ECU expects to see those electronic dampers, and it logs a fault the moment they disappear. This XYZ Racing coilover kit for the Audi A5 B8 Coupe (2007-2016) is the variant built for exactly that car, shipping with the electronic-damping cancellation hardware that keeps the system quiet about the swap. You get a height- and damping-adjustable setup without a permanent warning living on the dash.

Underneath that convenience sits the real reason owners make the change. The B8 carries its longitudinal engine ahead of the front-axle line, and that forward mass bias is what gives the A5 its built-in understeer. Manual coilovers hand you the corner-weighting and damping authority the adaptive system was never designed to give up.

What this coilover kit does for your 2007-2016 Audi A5 B8 Coupe

Lowering the A5 closes the factory arch gap and drops the centre of gravity, which is the first thing you feel turning into a fast B-road sweeper. Manual damping control lets you firm up the front to keep that heavy nose from washing wide, then balance the rear so the coupe rotates rather than ploughs. Because the cancellation kit handles the electronic-damping signal, you keep the ride-quality fault off the cluster while running a properly sorted mechanical setup. The result is a car that holds its line under load and sits over its wheels the way the standard adaptive setup never quite managed.

About the XYZ Racing coilover range

This A5 B8 fitment is offered across XYZ Racing’s full spec ladder, so you choose the damper to match how the car is actually used. Super Sport is the fast-road tune, Top Sport steps up for regular track days, and Racing Spec, Tarmac Rally, Drift Spec and Circuit Master cover the more focused competition disciplines. Each spec shares the same fully height-adjustable, damping-adjustable architecture, and each carries the electronic-damping cancellation kit specific to cars that left the factory with adaptive struts. The point of the range is fit-for-purpose: a road-biased A5 and a circuit A5 want very different spring and damper behaviour, and the spec you pick is where that decision is made.

Fitment for the Audi A5 B8 Coupe (2007-2016)

This kit is configured for the B8 A5 Coupe, chassis reference AU23-C, across the 2007 to 2016 model run. It is the dedicated build for examples fitted with factory electronic damping, which is why the cancellation hardware is part of the package rather than an afterthought. Confirm your car ran the adaptive damper option before ordering, since that is what this specific fitment addresses.