XYZ Racing Super Sport Coilovers — Audi A4 B8 SEDAN (Cancellation Kit for Electronic Damping) 2008-2016

The B8 A4’s nose-heavy layout is a polite way of saying it understeers at the limit – that longitudinally mounted engine sits well forward of the front axle, and the standard suspension is calibrated to keep the majority of drivers comfortable rather than to flatter the chassis. Raise the stakes with faster B-roads or an occasional club day and the softness becomes a liability. The XYZ Racing Super Sport coilover, paired with the included electronic damping cancellation kit, replaces the factory setup with a unit you can actually tune.

The cancellation kit is significant because a proportion of B8 A4 Sedans left the factory equipped with Audi’s DCC (Dynamic Chassis Control) electronic damping. Fit standard aftermarket coilovers to a DCC car without addressing the system and the dashboard lights up with fault codes. This variant handles that cleanly, giving owners of DCC-equipped cars a straightforward path to a properly sorted chassis.

What this coilover does for your 2008-2016 Audi A4 B8 Sedan

Thirty-six damping positions span a wide enough range to serve the B8 across two distinct roles: a daily commute on Britain’s varied road surfaces, and a weekend session at a club circuit where consistent corner entry is what matters. Ride height adjustment lets you pull the Sedan’s relatively upright factory stance down toward the wheel arch without resorting to spacers. On a platform that already carries significant front weight bias, reducing the centre of gravity sharpens turn-in and dials out the push at the front axle when you ask the car to change direction quickly. Less body roll, more steering feel – and none of the harshness that plagues poorly matched suspension swaps on this generation.

About the Super Sport coilover

The Super Sport sits in XYZ Racing’s fast-road and weekend-track bracket – not a full race setup, but a serious step beyond the factory ride. The 36-way damping adjustment is the headline: granular enough to configure from a softer motorway setting through to a firmer calibration for sustained higher-speed work on linked corners. Critically, the vendor specifies this damper as tested against road comfort: the system is explicitly engineered to eliminate the impact harshness from rough surfaces that makes a lot of coilover conversions unpleasant on the road. Ride height adjustment is independent of spring preload, so you are not sacrificing one for the other. The Super Sport covers weekend race and daily use within the same install – the 36 positions exist precisely to bridge that range.

Fitment for the Audi A4 B8 SEDAN (Cancellation Kit for Electronic Damping) (2008-2016)

This kit covers the B8 chassis A4 Sedan, chassis code AU21-C, across the 2008 to 2016 model year span. The electronic damping cancellation kit is part of the product and is required for cars fitted with Audi’s DCC system. DCC fitment varied by trim level and market on B8 A4s, so verify your car’s build sheet before ordering – this listing is specifically for cars that need the cancellation provision.

What buyers also search for

• Audi A4 B8 Sedan coilover kit for fast-road and weekend track use
• B8 A4 suspension upgrade with DCC electronic damping cancellation
• Audi A4 B8 2008-2016 adjustable coilovers with 36-way damping
• Audi B8 A4 Sedan ride height adjustment without fault codes on DCC cars
• XYZ Racing Super Sport coilovers Audi A4 B8 daily driver and circuit use

Adjustable ride height, 36 damping positions, and DCC deletion built in from the start. Configure yours below.