Audi A4 B6 2002-2004 — Coilovers

The B6 A4 carries its longitudinal engine slung ahead of the front axle line, and that nose-heavy bias defines how it behaves the moment you load the front tyres. XYZ Racing coilovers for the Audi A4 B6 2002-2004 give you the spring and damper control the standard setup never had, letting you settle the front end and stop the chassis washing wide on turn-in.

Whether the car left the factory as front-drive or quattro, the soft long-travel damping and generous arch gap are the two things owners chip away at first. This coilover range tackles both at once: ride height comes down to close the gap, and the firmer, height-adjustable platform sharpens a chassis that has always leaned on body roll to mask its weight up front.

What this coilover does for your 2002-2004 Audi A4 B6

Drop the ride height and the B6’s tall stance tightens visibly, but the real gain is body control – the nose stays flatter through a fast direction change instead of lolling onto its outside front corner. Adjustable damping lets you firm up rebound to stop the heavy front end from pattering over mid-corner bumps, while keeping enough compliance for British B-roads. On quattro cars you can bring the rear into play more, trimming the understeer that the all-wheel-drive layout dials in by default. The result is a front axle you can lean on under braking and a car that changes line when you ask, not a beat later.

About the XYZ Racing coilover range

Each XYZ Racing kit is built around a height-adjustable threaded body with independent spring-platform and damper settings, so corner balance and ride height are set separately rather than fighting each other. The range spans six specs for the A4 B6 – Super Sport for fast-road use, Top Sport for track days, Racing Spec and Circuit Master for committed circuit work, Tarmac Rally for stage and sprint surfaces, and Drift Spec for high-angle work. Damping adjustment runs through a single knob per corner on the road-biased kits, with the harder specs moving to stiffer rates and broader adjustment for grippier rubber and higher loads. Spring rates and valving are matched to the B6’s weight distribution rather than carried over from a generic platform.

Fitment for the Audi A4 B6 (2002-2004)

These coilovers are specified for the Audi A4 B6 chassis across the 2002 to 2004 model years. Confirm your build below to match the correct kit to front-drive or quattro running gear before you order.

What buyers also search for

• Audi A4 B6 coilovers for road and track use
• Audi A4 B6 height-adjustable suspension to drop the front arch gap
• Audi A4 B6 2002-2004 quattro coilovers to trim understeer
• adjustable damping coilovers for the B6 A4 nose-heavy chassis
• Audi A4 B6 lowering kit with separate ride-height and damper control

Pick the spec that matches how you drive your A4 B6 and configure yours below.