Skip to content

Circuit Master

XYZ Racing Circuit Master Coilovers — Audi A3 HATCH 3D 8P 4WD φ50 (Modified Rear Integrated) 2003-2012

SKU: AU08A-CM

  • IncludesFull set of 4 (front + rear)
  • Spring rate (F/R)22 / 12 kg/mm
  • Top mountOE (factory) mount
  • Lead time10–15 working days

Fits Audi A3 HATCH 3D 8P 4WD φ50 (Modified Rear Integrated) (2003-2012) chassis AU08A

Front spring rate (kg/mm)

22 kg/mm recommended

The recommended rate is the factory setup for your exact car — leave it unless a suspension specialist has specified otherwise. Recommended: 22 kg/mm. A custom rate on this axle adds £80.00.

Rear spring rate (kg/mm)

12 kg/mm recommended

The recommended rate is the factory setup for your exact car — leave it unless a suspension specialist has specified otherwise. Recommended: 12 kg/mm. A custom rate on this axle adds £80.00.

Configured price£2,890.00Inc. VAT

Lead time: 10–15 working days from payment


£2,890.00

Made to order. Full payment is taken at checkout. Production begins once payment is confirmed.

Pay by card, Apple Pay, Google Pay — or Klarna on eligible orders.

XYZ Racing Circuit Master Coilovers — Audi A3 HATCH 3D 8P 4WD φ50 (Modified Rear Integrated) 2003-2012

The 8P-generation A3 in 3-door quattro form carries its Haldex coupling and prop-shaft hardware low along the underbody, adding weight toward the rear axle that a front-drive 8P never has to manage. That extra mass changes how the car settles under trail-braking and how quickly the rear can be brought back into line mid-corner – exactly the behaviour the XYZ Racing Circuit Master coilover kit for this Audi A3 Hatch 3D 8P 4WD φ50 is built to address.

This Modified Rr Integrated specification is set up for the quattro car’s own rear mounting points rather than adapted from a front-drive kit, so the shock body and mount geometry sit where the Haldex-equipped rear subframe actually needs them. For an owner putting this A3 through sustained circuit lap-time work, that means the rear axle is doing its job on the car it was actually built into, not fighting a compromise.

What this coilover kit does for your 2003-2012 Audi A3

Circuit Master’s damping range is built around repeat-lap consistency rather than a single fast lap, which matters on a quattro 8P where the added driveline weight makes body control harder to hold once tyres and dampers heat up over a session. The 9720-way adjustment range behind the kit’s three external knobs lets you separate compression and rebound control enough to firm up the rear for corner entry without turning the ride harsh on the transit laps between sessions. Because the 8P chassis is torsionally stiff for a hot hatch of its era, a coilover with this much range translates directly into changed handling rather than just soaking up flex, so adding more low-speed compression will visibly tighten turn-in on the A3’s front axle. Ride height adjustment independent of spring preload also lets you correct the nose-up stance the Haldex hardware tends to leave on standard springs, levelling the car front to rear for consistent tyre contact through fast direction changes.

About the Circuit Master coilover

Circuit Master sits at the top of XYZ Racing’s range, built for cars doing serious circuit and competitive work rather than fast-road use alone. The design has been run and tested by XYZ-affiliated racing teams across multiple countries, and the 9720-way adjustment count is a genuine spread across the three external knobs rather than a marketing figure – enough range to set the kit up for a specific track, tyre compound or ballast weight rather than picking the nearest preset. The knob and internal oil-passage design uses deliberately small metering holes to sharpen damping response at the fine end of the adjustment range; over rough circuit kerbs or transitions this can produce a faint clicking or ticking noise as oil passes through those passages, which is a normal characteristic of this build rather than a fault. The internals are engineered to resist the heat build-up that comes from back-to-back sessions, holding damping force consistent across a full circuit run rather than fading after a handful of quick laps. It’s a kit built for drivers who already know their target ride height and spring rate and want the adjustment range to fine-tune from there, not a general-purpose ride upgrade.

Fitment for the Audi A3 (2003-2012)

This kit is specced for the Audi A3 Hatch 3D, chassis code AU08-A, 8P-generation quattro (4WD) cars built between 2003 and 2012, using the 50mm strut body and the Modified Rr Integrated rear mounting arrangement for this driveline layout. Confirm your car is the 3-door quattro variant before ordering, as the 4WD rear geometry differs from the front-drive 8P kit.

What buyers also search for

  • Audi A3 8P quattro coilover upgrade for track and fast-road use
  • Audi A3 Circuit Master damping suited to repeat circuit sessions
  • Audi A3 Hatch 3D 4WD coilover kit with adjustable ride height
  • Audi A3 8P suspension setup aimed at consistent lap times
  • Audi A3 quattro coilover options for the 2003-2012 chassis

Configure your Circuit Master spec for this A3 below to match ride height and damping to your track or road use.

This is the best design, on the competitive version such as Racing Spec, Drift Spec, Tarmac Rally. This is the ultimate boutique for racing in many international athletics tracks, and test for a long time. This is for purchase handling high performance and the essential partner in different racing. Circuit Master Damper is tested through XYZ racing teams all over the world. 9720 ways of different adjustments can meet all customers’ needs and win the 1st place in every race.

Because its 3 adjustment knobs with small oil hole design, when driving through big bumps, the coilover oil will go through small passage which might cause some small noise. This is normal situation. This product is made for circuit tracks and there will be no concern for bumps on the tracks.

Top mounts included with your kit

Every XYZ Racing coilover kit ships with the upper mounts listed below for your exact chassis — no extra parts to source.

  • OE (factory) mount top mountOE (factory) mountOERetains the OEM (factory) upper mount — preserves the original ride comfort, noise and vibration behaviour for a stock-like feel.
Same car

Other products that fit this vehicle

Coilover ranges, brake kits and wheels for this car