XYZ Racing Hollow Front Brake Kit — Mitsubishi GALANT (NA) (1998-2003)

Front-wheel-drive dynamics push the bulk of braking load onto the Galant NA’s front axle, and that demand becomes particularly acute with the 3.0-litre V6 under the bonnet, a combination that was always pressing harder against the limits of the factory front discs than the OE specification could comfortably handle on an extended fast road. This XYZ Racing Hollow Front Brake Kit gives the 1998-2003 Mitsubishi Galant NA a front braking system better matched to what the car actually asks of it.

It is a front-axle upgrade, a matched pair of left and right front calipers and discs. Three pad compounds, Street, Sport and Racing, calibrate the brake’s character to how the car is used. Included caliper colours mean the hardware reads through open-spoke wheels rather than disappearing behind them.

What this brake kit does for your 1998-2003 Mitsubishi GALANT (NA)

On the Galant NA’s FWD layout, the front brakes are responsible for the majority of retardation under hard deceleration; the geometry of the platform means there is no meaningful way to redistribute that load rearward without sacrificing stability. The hollow-vane disc construction improves airflow through the disc, drawing heat away far faster than a solid casting and keeping fade at bay when stops are short and repeated, while the lighter rotor trims rotating and unsprung mass at the front. Street is the quiet, low-dust road default that covers everyday use without drama. Sport adds bite and heat range for drivers who push harder without committing fully to track sessions. Racing handles the elevated temperatures of sustained performance driving. Caliper colour is included at no extra cost in Red, Yellow, Gold, Black and Anodized Black, with a custom route for builds outside that palette, so the installation contributes visually through the wheel arch.

About the Hollow Front Brake Kit

The Hollow name describes the construction directly: the caliper is hollow-bodied as standard, and the two-piece floating rotors run internal vanes that reduce unnecessary mass and circulate air through the disc to control temperature during repeated hard stops. Discs are available drilled or slotted at the same price, plumbed on braided lines for a firm, repeatable pedal. The three pad grades, Street, Sport and Racing, match the kit’s envelope to the intended use, from a Galant covering daily traffic to one pressed into occasional spirited use. For serious track use an optional Hollow Racing caliper upgrade is offered, run without a dust cover, rated to 1000C and backed by a two-year warranty. Caliper finish is included in Red, Yellow, Gold, Black and Anodized Black, with a Custom Color to any Pantone for £150, premium polished-forged Titanium, Polished Gold and Polished Silver, and candy Teal, Blue, Red and Orange. For a front-wheel-drive saloon of the Galant’s dimensions and weight class, concentrating the upgrade at the front axle reflects where the braking system is genuinely stressed.

Fitment for the Mitsubishi GALANT (NA) (1998-2003)

This front brake kit is built for the Mitsubishi Galant in North American specification, covering model years 1998 through 2003. The front axle position aligns with the primary braking circuit on the Galant NA’s front-wheel-drive platform. Verify wheel clearance against your specific rim diameter and spoke design before fitting.

What buyers also search for

• Mitsubishi Galant NA front brake upgrade for fast-road and occasional track use
• Galant 1998-2003 big brake kit with Street, Sport and Racing pad compound options
• Mitsubishi Galant FWD front axle brake kit with hollow rotor construction
• Galant NA brake fade reduction upgrade compatible with V6 and four-cylinder variants
• Mitsubishi Galant front brake kit with caliper colour options including custom finish

Select your pad compound, disc style and caliper colour above when you order.