
XYZ Racing Hollow Rear Brake Kit — Ford FOCUS (2005-2010)
SKU: XYZ-BRK-BKR-FO-001-REAR
- IncludesRear axle pair (2 discs + 2 calipers)
- PositionRear
- Disc Ø380–421 mm
- Caliper pots8-pot
- Lead time10–15 working days
Fits Ford FOCUS (2005-2010)
Added to basket ✓
Caliper render for this kit:

The Mk2 Focus carries its braking bias hard at the front, which leaves the rear axle doing quiet but important work: settling the car on turn-in and holding the back end composed under trail-braking through the Control Blade rear suspension. The XYZ Racing Hollow Rear Brake Kit for the Ford Focus (2005-2010) gives that rear axle more thermal headroom and a firmer, more repeatable bite, so the balance you set up front stays put.
This is a rear-specific upgrade, a matched pair of rear calipers and discs built around hollow-vaned rotors that shed heat faster than the standard solid items. For a fast-road Focus or an ST225 seeing the odd track day, that matters most on the third and fourth hard stop, where stock rear brakes start to go soft and the pedal lengthens.
What this brake kit does for your 2005-2010 Ford Focus
On the road you will feel a shorter, more consistent pedal and a rear axle that recovers heat between corners instead of stewing in it. The hollow-vane disc design pulls temperature out of the rotor face quickly, keeping the rear pads in their working window rather than fading after repeated stops. Pick the Street compound for a daily Focus that still sees spirited B-road use, Sport for harder fast-road work, or step up to the Racing compound when the car is on track and the rear needs to bite from heat. Matched sensibly with a front upgrade, the kit keeps your front-to-rear brake balance honest, so the Focus stays stable under hard deceleration instead of nervous at the back.
About the Hollow Rear Brake Kit
The Hollow Rear Brake Kit replaces the Focus’s standard rear setup with a disc whose hollow-vane construction increases the surface area available for heat to escape, lowering peak rotor temperatures and resisting the warping and judder that plague overworked rear discs. The disc is a two-piece floating design, offered drilled or slotted at the same price and fed by braided lines, and the caliper is hollow-body as standard; for harder track use you can specify the optional Hollow Racing upgrade, which runs without a dust cover, is rated to 1000C and carries a two-year warranty. Three pad compounds are offered: Street for an OE-style feel and stronger fast-road bite, Sport for harder road and light track use, and Racing for track sessions where heat-soaked consistency matters more than cold response. Painted caliper finishes run from Red, Yellow, Gold, Black and Anodized Black at no extra cost through to any Pantone shade as a Custom Color for a small upcharge, plus premium polished-forged finishes (Titanium, Polished Gold, Polished Silver), candy finishes (Candy Teal, Candy Blue, Candy Red, Candy Orange), and two-tone centre bells in five anodized colours or titanium, so the kit suits a sleeper build or a fully visible one behind open-spoke wheels. It is a bolt-on, rear-axle package designed to lift the thermal ceiling of the brakes without re-engineering the car, and it retains normal handbrake function for daily use.
Fitment for the Ford Focus (2005-2010)
This kit is mapped to the Mk2 Ford Focus across the 2005 to 2010 model years, covering the standard hatch and estate through to the hotter ST and RS variants of that generation. It is a rear-axle fitment only. Confirm your exact build year and trim against the options above before ordering.
What buyers also search for
- Ford Focus Mk2 rear brake upgrade for fast road and occasional track use
- Ford Focus ST225 rear disc and caliper kit with selectable pad compounds
- Ford Focus 2005-2010 big brake kit that keeps front-to-rear balance honest
- Rear brake kit for the Ford Focus with hollow discs for better heat management
Choose your pad compound and caliper finish from the options above and the kit is built to your spec.
What’s in the kit
Rear axle kit — supplied as a complete bolt-on assembly.
- 2×Two-piece floating discs — 380–421 mm: you pick the exact diameter with the "Disc size" option
- 2×Lightweight aluminium centre bells
- 2×Forged aluminium calipers — 8-pot
- 2×High-stiffness mounting brackets
- 2×Braided stainless steel brake lines
- 4×High-performance brake pads (1 set)
- 1×Fitting hardware & tools pack
Parking brake: OE handbrake not retained — a hydraulic handbrake is required.
Choosing your spec
Every kit is built to order around the choices you make above. Here is what each option actually changes, so you can spec yours with confidence.
Brake pads — Street, Sport or Racing
Every kit ships with a full set of high-performance pads; the compound is your call.
Street is the right default for fast-road driving — a strong, progressive cold bite with low noise, low dust and long disc life. Sport raises the working temperature and adds bite and fade resistance for hard road use and the occasional track day, while still behaving on a cold morning. Racing is a track compound built for sustained abuse: huge fade resistance and bite once heat is in it, at the cost of more noise and dust when cold. Match the pad to how hard you actually use the brakes — there is no benefit to a race pad that never gets up to temperature.
Caliper grade — Hollow vs Hollow Racing
Hollow is the standard caliper on every kit: a hollow-body forged caliper, lighter than a solid one, fitted with a dust cover and backed by a 5-year oil-leak warranty. For most fast-road and spirited track use it is all the caliper you need.
Hollow Racing is the track-grade upgrade. It runs the same hollow body but without a dust cover (so there is nothing to melt at sustained high temperature), uses a twin-metal piston that isolates heat travelling from the disc to the oil seal, and is rated to 1000°C. Available 330–356mm (rear). Warranty is 2 years on oil leaks and 10 years on appearance. Built for professional racing and repeated track days.

Caliper colour & finish
Painted colours (Red, Yellow, Gold, Black, Anodized Black) are included at no cost. Want an exact match to your car? Custom Color (+£150) paints the calipers to any Pantone code you supply (15–20 day lead time).
Polished Forged finishes are the flagship: a forged caliper given a mirror-polished surface treatment that shifts colour with the viewing angle. Beyond the looks, the polished surface dissipates heat better, resists rust and stands up to the weather. Choose Titanium (neochrome, +£350), Polished Gold (+£300) or Polished Silver (+£250). They look their best paired with a titanium centre bell. Care: clean only with a dilute neutral cleaner or water.
Candy colours (+£200) use a deep candy-paint and polishing process for a mirror-reflection, boutique finish — pick Teal, Blue, Red or Orange (shown below right).


Centre bells
The centre bell is the CNC-machined aluminium hat that joins the disc to the hub. The standard anodized centre bell is included. The Two-tone bell (+£200) adds an anodized accent ring — choose Red, Yellow, Orange, Purple or Silver right here at checkout. The Titanium centre bell (+£500) is a forged titanium bell (bolts not included) that finishes off the polished-forged look.

Other products that fit this vehicle
Front & rear brake kits, coilovers and more for this car
-
FrontXYZ Racing Hollow Front Brake Kit — Ford FOCUS (2005-2010)
£2,000.00 inc. VATView → -
CoiloversXYZ Racing Drag Racing Coilovers — Ford FOCUS 2012-2018
£1,690.00 inc. VATView → -
CoiloversXYZ Racing Street Advanced Coilovers — Ford FOCUS 2012-2018
£1,990.00 inc. VATView → -
CoiloversXYZ Racing Pro Rally Coilovers — Ford FOCUS 2012-2018
£6,000.00 inc. VATView → -
CoiloversXYZ Racing Circuit Master Coilovers — Ford FOCUS 2012-2018
£2,890.00 inc. VATView → -
CoiloversXYZ Racing Tarmac Rally Coilovers — Ford FOCUS 2012-2018
£1,690.00 inc. VATView → -
CoiloversXYZ Racing Racing Spec Coilovers — Ford FOCUS 2012-2018
£1,690.00 inc. VATView →