Skip to content

Racing Spec

XYZ Racing Racing Spec Coilovers — Seat LEON MK2 φ55 2005-2012

SKU: SE23-RS

  • IncludesFull set of 4 (front + rear)
  • Spring rate (F/R)22 / 12 kg/mm
  • Top mountFront: Pillow ball + rubber / Hardened rubber · Rear: OE (factory) mount
  • Lead time10–15 working days

Fits Seat LEON MK2 φ55 (2005-2012) chassis SE23

Front spring rate (kg/mm)

22 kg/mm recommended

The recommended rate is the factory setup for your exact car — leave it unless a suspension specialist has specified otherwise. Recommended: 22 kg/mm. A custom rate on this axle adds £80.00.

Rear spring rate (kg/mm)

12 kg/mm recommended

The recommended rate is the factory setup for your exact car — leave it unless a suspension specialist has specified otherwise. Recommended: 12 kg/mm. A custom rate on this axle adds £80.00.

Configured price£1,690.00Inc. VAT

Lead time: 10–15 working days from payment


£1,690.00

Made to order. Full payment is taken at checkout. Production begins once payment is confirmed.

Pay by card, Apple Pay, Google Pay — or Klarna on eligible orders.

XYZ Racing Racing Spec Coilovers — Seat LEON MK2 φ55 2005-2012

The SE23-generation Leon’s stiffer chassis and wider front track were built to carry a proper hot hatch through a fast direction change, but the standard dampers were never calibrated for repeated hard laps. XYZ Racing’s Racing Spec coilover replaces that compromise with a damper whose settings come directly from touring car competition, not a road-biased spreadsheet.

This is the track and time-attack spec in the range: a kit built for drivers who are logging session after session at a circuit, not just stiffening up a fast road car. On a MK2 Leon it addresses the specific weak point of the platform under load – the way the front end wants to push wide once you’ve asked the tyres for everything mid-corner.

What this coilover does for your 2005-2012 Seat LEON MK2 Φ55

Fitted to the Φ55-chassis Leon, the Racing Spec damper firms up body control through direction changes without turning the ride into a single fixed setting you’re stuck with. Because the valving originates from WTCC-level development, the damper responds consistently as load builds through a corner rather than losing composure once you’re past the point a road-tuned kit would fade. That matters specifically on this chassis, where the front-drive layout already loads the outside front tyre hard under trail-braking – a damper that holds its line here is what lets you carry more speed into the apex rather than backing off. The result on track is a Leon that changes direction with less of the float you get from the factory dampers, and that keeps its composure lap after multiple laps rather than just for the first flying lap.

About the Racing Spec coilover

XYZ Racing developed the Racing Spec damper specifically for circuit racing, drawing its baseline settings from direct involvement in touring car competition including WTCC. That pedigree is the point of the type: rather than starting from a road damper and stiffening it, the valving is built around what a car needs when it’s lapping repeatedly at pace. For Leons running heavier modifications – bigger brakes, aero, a more aggressive alignment – XYZ Racing can also produce a custom-specified damper once you supply the details of what’s been changed on the car and which circuit you’re targeting, effectively treating your Leon as its own development mule rather than forcing it through a generic off-the-shelf curve.

Fitment for the Seat LEON MK2 (2005-2012)

This kit is built for the Seat LEON MK2 Φ55 chassis, code SE23, covering the 2005 to 2012 model years. Confirm your Leon sits within this chassis code and year span before ordering, since Φ55-platform variants changed across the Volkswagen Group’s PQ35 architecture during this period.

What buyers also search for

  • Seat Leon MK2 coilovers built for repeated track sessions rather than a single fast lap
  • SE23 Leon suspension upgrade that controls front-end push under hard cornering
  • Seat Leon Racing Spec damper option for drivers running additional track modifications
  • Leon MK2 Φ55 coilover kit sourced from touring car damper development

Configure yours below to match your Leon MK2’s exact spec and get the Racing Spec kit built for your car.

Racing Spec damper is specially made for track race, and all settings have been obtained from direct participation in racing event such as WTCC. In some circumstances, particular custom-made shock absorbers are available for those cars that have aggressive upgrades like factory’s racing vehicles or A-class racing cars etc…You may provide us with detailed info on all upgraded parts in your car and what circuit you will run, and we are able to make custom shock absorbers for your personal car.

Top mounts included with your kit

Every XYZ Racing coilover kit ships with the upper mounts listed below for your exact chassis — no extra parts to source.

Front

  • Pillow ball + rubber top mountPillow ball + rubberP+Pillow-ball upper with a rubber insert — adds steering precision and camber adjustability while keeping some of the factory mount’s harshness damping.
  • Hardened rubber top mountHardened rubberRHardened rubber upper — firmer than the factory bush for tighter response while retaining road-friendly noise and vibration isolation.

Rear

  • OE (factory) mount top mountOE (factory) mountOERetains the OEM (factory) upper mount — preserves the original ride comfort, noise and vibration behaviour for a stock-like feel.
Same car

Other products that fit this vehicle

Coilover ranges, brake kits and wheels for this car