Skip to content

Pro Rally

XYZ Racing Pro Rally Coilovers — Chery COWIN / FLAGCLOUD 2003-2012

SKU: CE02-PR

  • IncludesFull set of 4 (front + rear)
  • Top mountOE (factory) mount
  • Lead time10–15 working days

Fits Chery COWIN / FLAGCLOUD (2003-2012) chassis CE02

Lead time: 10–15 working days from payment


£6,000.00

Made to order. Full payment is taken at checkout. Production begins once payment is confirmed.

Pay by card, Apple Pay, Google Pay — or Klarna on eligible orders.

XYZ Racing Pro Rally Coilovers — Chery COWIN / FLAGCLOUD 2003-2012

The CE02 Cowin / Flagcloud is a light front-wheel-drive saloon, and on a loose gravel stage that low mass works for you rather than against you – there is less inertia to settle between corners and less weight punishing the dampers over rough ground. The XYZ Racing Pro Rally coilover for the Chery Cowin / Flagcloud is built for exactly that environment: top-flight rally competition on gravel and snow, where suspension travel and damping control decide stage times far more than outright stiffness.

This is competition hardware, not a fast-road lowering kit. XYZ offers the Pro Rally setup in two forms – one that bolts to the original Cowin / Flagcloud chassis for amateur and clubman use, and a professional version intended to be fitted after the bodyshell has been modified for serious stage work.

What this coilover does for your 2003-2012 Chery Cowin / Flagcloud

On a gravel stage the Pro Rally setup gives the Cowin / Flagcloud the long, controlled wheel travel it needs to keep the tyres loaded over ruts, crests and broken surfaces. The damping is set to absorb big single hits without packing down over washboard, so the driven front axle keeps biting where a road-biased kit would skip and scrabble. Run a little more ride height to clear rough ground, or sit the car lower for a smoother tarmac link section, then reset it between events. The outcome is a front-driven saloon that puts its power down on a surface where traction, not spring rate, wins the stage.

About the Pro Rally coilover

The Pro Rally is XYZ Racing’s gravel and snow competition coilover, sitting at the serious end of the range rather than among the road kits. XYZ build it in two specifications. The first is an amateur or clubman type that installs directly onto the standard Cowin / Flagcloud chassis, letting a privateer run a recognised car without cutting into the shell. The second is a professional type, designed to be fitted once the bodyshell has been modified for full stage spec – illustratively, reinforced suspension turrets and revised pickup points as part of a competition build. Both are aimed squarely at loose-surface rallying, where the suspension has to soak up large, repeated impacts and still hold the car’s attitude through long, sliding corners. Choose the specification that matches how far your Cowin / Flagcloud build has actually gone.

Fitment for the Chery Cowin / Flagcloud (2003-2012)

This kit is matched to the Chery Cowin / Flagcloud on the CE02 chassis, covering the 2003 to 2012 production span. Confirm your car sits within that year range and carries the CE02 platform code before configuring, as the fitment is specific to this generation.

What buyers also search for

  • Chery Cowin / Flagcloud rally coilovers for gravel and snow stage use
  • CE02 Cowin / Flagcloud competition suspension for clubman and privateer rally builds
  • Long-travel Chery Cowin / Flagcloud coilover setup for loose-surface grip
  • Pro Rally Chery Cowin / Flagcloud damping for rough, broken stage surfaces
  • Chery Cowin / Flagcloud suspension upgrade for amateur or full professional rally spec

Pick the amateur or professional Pro Rally specification for your Chery Cowin / Flagcloud and configure yours below.

Rally gravel/snow suspensions are very professional suspensions and they are designed into two types:

1. Be installed directly with the original chassis. (Amateur type)
2. Be installed after modifying the car body. (Professional type)

Top mounts included with your kit

Every XYZ Racing coilover kit ships with the upper mounts listed below for your exact chassis — no extra parts to source.

  • OE (factory) mount top mountOE (factory) mountOERetains the OEM (factory) upper mount — preserves the original ride comfort, noise and vibration behaviour for a stock-like feel.
Same car

Other products that fit this vehicle

Coilover ranges, brake kits and wheels for this car