XYZ Racing Street Advanced Coilovers — Audi A1 8X 2010-2018

The Audi A1 8X carries most of its mass over the front axle and rides taller than its sporting looks suggest, so the standard dampers tend to float over mid-corner bumps and let the body lean onto the outside front. The XYZ Racing Street Advanced coilover is built to settle that nose-led front end and bring the ride height down to where the small Audi starts to feel properly tied to the road.

Designed for everyday road use first, with the headroom to cope with the occasional track day, the Street Advanced gives you 720 individual damping settings to balance comfort against control. For an owner who drives the A1 daily but wants it to corner flatter and sit right on a chosen wheel package, it is the sensible middle of the XYZ Racing range.

What this coilover kit does for your 2010-2018 Audi A1 8X

Drop the ride height and the 8X’s centre of gravity drops with it, cutting the body roll that blunts turn-in on the standard car. The 720-way damping range lets you run a softer setting for broken UK B-roads and firm things up before a track day, all from the same hardware. Up front, tighter damping control keeps the nose-heavy A1 from diving hard under braking and washing wide into a corner. Set the height to clear your wheel and tyre combination and the car sits level rather than nose-up, holding a deliberate stance instead of crashing through the short-travel factory setup.

About the Street Advanced coilover

The Street Advanced is the most popular kit in the XYZ Racing range, mainly because it covers the ground most owners actually drive. XYZ’s engineers developed it over several years and ran it through international race testing before signing it off for production. Each strut carries 720 distinct damping positions, so the spread runs from supple to firm without swapping any parts. Ride height is adjustable independently of spring preload, which keeps the geometry sane as you go lower. It is engineered for two jobs – normal road driving and the occasional track day – which is exactly the brief most fast-road A1 owners are working to. For a driver chasing more speed and tighter control without committing to a stripped-out track build, this is the kit that fits.

Fitment for the Audi A1 8X (2010-2018)

This coilover kit is matched to the 8X-chassis Audi A1 across the full 2010 to 2018 production run. The application is specific to that chassis code and year span, so check that your car reads 8X before ordering. Trim and PCD are confirmed at the configurator below.

What buyers also search for

• Audi A1 8X suspension upgrade for road use with occasional track days
• Audi A1 8X coilover with adjustable ride height and damping for daily driving
• Lowering the Audi A1 8X without losing comfort on UK roads
• Street Advanced damping settings for the nose-heavy A1 front end
• Audi A1 8X 2010-2018 coilover fitment and stance setup

Set your A1 up the way you actually drive it – pick your ride height and damping spec and configure yours below.