
XYZ Racing Hollow Rear Brake Kit — Nissan SKYLINE V35 (2001-2006)
SKU: XYZ-BRK-BKR-NI-015-REAR
- IncludesRear axle pair (2 discs + 2 calipers)
- PositionRear
- Disc Ø330–421 mm
- Caliper pots6 / 8-pot
- Lead time10–15 working days
Fits Nissan SKYLINE V35 (2001-2006)
Added to basket ✓
Caliper render for this kit:

The V35 Skyline marked the end of the RB inline-six era and the start of the FM-platform, VQ35-powered GT, a heavier, more grand-tourer car than the R34 it replaced. That added mass, carried over a long bonnet and a rearward-biased FM layout shared with the Z33, leaves the standard rear brakes doing more work than most owners expect once a fast B-road turns into a circuit session.
This XYZ Racing rear big brake kit for the Nissan Skyline V35 (2001-2006) goes after the rear axle directly: larger hollow-vane two-piece floating discs and stiffer calipers that hold up to the repeat heavy stops the OE rear setup struggles with. Supplied as a matched pair of left and right rear calipers and discs, it tackles the half of the braking system most upgrades skip, and on a rear-driven coupe of this weight it is the half that governs how settled the car stays into a corner.
What this big brake kit does for your 2001-2006 Nissan Skyline V35
On the road you feel it as a firmer, more progressive pedal that does not go long after a run of hard stops. On track the gains are about heat: the hollow disc vanes shed temperature faster, so the rear of the V35 resists fade across a session rather than tailing off after three or four laps, and the two-piece floating discs expand evenly instead of coning. A larger, more rigid rear caliper sharpens brake balance, which matters on a car that likes to rotate: you get cleaner, more predictable trail-braking and less of the nervous rear-end shuffle the standard discs invite when they are cooked. Pad compound choice lets you set the rear bite to match how you drive, from a quiet Street setup to a track-focused Racing compound, with Sport in between for fast road with occasional circuit work.
About the Hollow Rear Brake Kit
The kit replaces the V35’s rear discs with hollow-vane, internally vented two-piece floating rotors designed to drop rotating mass while opening up airflow through the disc face for quicker cooling. Discs come drilled or slotted at the same price, with a two-tone centre bell in five anodized colours or titanium selectable at checkout. It pairs them with an uprated hollow-body rear caliper, included at no extra cost in Red, Yellow, Gold, Black or Anodized Black, with a Custom Color in any Pantone for £150, premium polished-forged finishes in Titanium, Polished Gold and Polished Silver, and candy options in Teal, Blue, Red and Orange. Three pad compounds are offered: Street for quiet, low-dust daily use, Sport for fast-road work with stronger cold bite, and Racing for sustained high-temperature circuit duty. A Hollow Racing caliper upgrade is available for hard track use, with no dust cover, a 1000C rating and a two-year warranty. Because it is a rear-specific kit, it is engineered to complement, not overwhelm, the front axle, keeping front-to-rear balance sensible rather than over-braking the back of the car.
Fitment for the Nissan Skyline V35 (2001-2006)
This kit is sized for the rear axle of the Nissan Skyline V35 across the 2001 to 2006 model years. It is a rear-position fitment only; confirm your chassis sits within that V35 production span before ordering, and pair it with a matching front setup if you want a full-axle revision.
What buyers also search for
- Nissan Skyline V35 rear big brake kit for road and track use
- V35 Skyline rear brake upgrade to cut fade on repeat heavy stops
- Hollow-vane vented rear discs for the 2001-2006 Skyline V35
- Skyline V35 rear caliper colour options including Red, Black and a custom Pantone
- V35 brake pad compound choice from Street to Racing for the rear axle
Set your pad compound, disc style and caliper colour in the buy options above to build your Nissan Skyline V35 rear brake kit.
What’s in the kit
Rear axle kit — supplied as a complete bolt-on assembly.
- 2×Two-piece floating discs — 330–421 mm: you pick the exact diameter with the "Disc size" option
- 2×Lightweight aluminium centre bells
- 2×Forged aluminium calipers — 6 / 8-pot
- 2×High-stiffness mounting brackets
- 2×Braided stainless steel brake lines
- 4×High-performance brake pads (1 set)
- 1×Fitting hardware & tools pack
Parking brake: Retains your original (OE) handbrake.
Choosing your spec
Every kit is built to order around the choices you make above. Here is what each option actually changes, so you can spec yours with confidence.
Brake pads — Street, Sport or Racing
Every kit ships with a full set of high-performance pads; the compound is your call.
Street is the right default for fast-road driving — a strong, progressive cold bite with low noise, low dust and long disc life. Sport raises the working temperature and adds bite and fade resistance for hard road use and the occasional track day, while still behaving on a cold morning. Racing is a track compound built for sustained abuse: huge fade resistance and bite once heat is in it, at the cost of more noise and dust when cold. Match the pad to how hard you actually use the brakes — there is no benefit to a race pad that never gets up to temperature.
Caliper grade — Hollow vs Hollow Racing
Hollow is the standard caliper on every kit: a hollow-body forged caliper, lighter than a solid one, fitted with a dust cover and backed by a 5-year oil-leak warranty. For most fast-road and spirited track use it is all the caliper you need.
Hollow Racing is the track-grade upgrade. It runs the same hollow body but without a dust cover (so there is nothing to melt at sustained high temperature), uses a twin-metal piston that isolates heat travelling from the disc to the oil seal, and is rated to 1000°C. Available 330–356mm (rear). Warranty is 2 years on oil leaks and 10 years on appearance. Built for professional racing and repeated track days.

Caliper colour & finish
Painted colours (Red, Yellow, Gold, Black, Anodized Black) are included at no cost. Want an exact match to your car? Custom Color (+£150) paints the calipers to any Pantone code you supply (15–20 day lead time).
Polished Forged finishes are the flagship: a forged caliper given a mirror-polished surface treatment that shifts colour with the viewing angle. Beyond the looks, the polished surface dissipates heat better, resists rust and stands up to the weather. Choose Titanium (neochrome, +£350), Polished Gold (+£300) or Polished Silver (+£250). They look their best paired with a titanium centre bell. Care: clean only with a dilute neutral cleaner or water.
Candy colours (+£200) use a deep candy-paint and polishing process for a mirror-reflection, boutique finish — pick Teal, Blue, Red or Orange (shown below right).


Centre bells
The centre bell is the CNC-machined aluminium hat that joins the disc to the hub. The standard anodized centre bell is included. The Two-tone bell (+£200) adds an anodized accent ring — choose Red, Yellow, Orange, Purple or Silver right here at checkout. The Titanium centre bell (+£500) is a forged titanium bell (bolts not included) that finishes off the polished-forged look.

Other products that fit this vehicle
Front & rear brake kits, coilovers and more for this car
