
XYZ Racing Hollow Rear Brake Kit — Honda CIVIC FD2 TYPE-R (2005-2011)
SKU: XYZ-BRK-BKR-HO-02-A-REAR
- IncludesRear axle pair (2 discs + 2 calipers)
- PositionRear
- Disc Ø380–421 mm
- Caliper pots8-pot
- Lead time10–15 working days
Fits Honda CIVIC FD2 TYPE-R (2005-2011)
Added to basket ✓
Caliper render for this kit:

The FD2 Type-R was the first Civic to wear factory Brembos up front, which is exactly why its rear axle becomes the limiting factor once you start braking in anger. The XYZ Racing rear brake kit for the Honda Civic FD2 Type-R rebalances that equation, giving the back of the car the thermal headroom and bite the front has always had.
Built for the heavier four-door Type-R, this rear setup is a pair of rear calipers and discs, left and right, pairing hollow-vane two-piece floating discs with a caliper you can run on Street, Sport or Racing pad compounds. For repeated stops from three-figure speeds on a circuit day, it keeps rear bias predictable at the point where the standard discs would already be heat-soaked.
What this rear brake kit does for your 2005-2011 Honda Civic FD2 Type-R
Because the FD2’s front brakes were never the weak point, the gains here are felt at the rear axle where they matter for balance. A rear kit with genuine thermal capacity holds brake bias steady deep into a corner, so the car settles rather than going light at the back under trail-braking. The hollow-vane discs shed heat faster than the standard solid discs, which delays the fade that turns a firm pedal soft by the third hard lap. Matching the pad compound to how you drive keeps the rear biting consistently: Street for quiet road miles, Sport for fast road with the odd track day, Racing when you are chasing a time. Braided lines hold the pedal firm as the fluid heats.
About the Hollow rear brake kit
The discs are two-piece floating rotors with a hollowed internal vane structure that trims rotating mass and pulls heat out of the friction face quickly. Less mass at the wheel gives the FD2’s rear suspension less to control, while the faster heat path keeps the disc in its proper operating window under sustained load. The kit is built specifically for the rear of the car and accepts three pad compounds, Street, Sport and Racing, so the same hardware covers a road-biased build or a full circuit specification. The caliper is hollow-body as standard, with an optional Hollow Racing upgrade for hard track use that drops the dust cover, takes a 1000C rating and carries a two-year warranty. Included finishes are Red, Yellow, Gold, Black and Anodized Black at no extra cost, with a custom Pantone colour and premium polished-forged (Titanium, Polished Gold, Polished Silver) or candy (Teal, Blue, Red, Orange) options to suit your wheel and brake theme.
Fitment for the Honda Civic FD2 Type-R (2005-2011)
This is a rear brake kit for the Honda Civic FD2 Type-R, covering the 2005-2011 production span. It fits the rear axle only and is configured for the FD2 saloon chassis rather than the EP3 or FN2 hatches. Confirm your build year falls inside that range before specifying pad compound and caliper colour.
What buyers also search for
- Honda Civic FD2 Type-R rear brake upgrade to balance the factory Brembo front end.
- FD2 Type-R rear big brake kit with Street, Sport or Racing pad compounds.
- Honda Civic FD2 brake kit caliper colours including red, yellow, gold and custom.
- Rear brake fade resistance for FD2 Type-R circuit days and fast-road use.
Choose your pad compound, caliper finish and centre-bell option, then build your FD2 rear kit when you order.
What’s in the kit
Rear axle kit — supplied as a complete bolt-on assembly.
- 2×Two-piece floating discs — 380–421 mm: you pick the exact diameter with the "Disc size" option
- 2×Lightweight aluminium centre bells
- 2×Forged aluminium calipers — 8-pot
- 2×High-stiffness mounting brackets
- 2×Braided stainless steel brake lines
- 4×High-performance brake pads (1 set)
- 1×Fitting hardware & tools pack
Parking brake: OE handbrake not retained — a hydraulic handbrake is required.
Choosing your spec
Every kit is built to order around the choices you make above. Here is what each option actually changes, so you can spec yours with confidence.
Brake pads — Street, Sport or Racing
Every kit ships with a full set of high-performance pads; the compound is your call.
Street is the right default for fast-road driving — a strong, progressive cold bite with low noise, low dust and long disc life. Sport raises the working temperature and adds bite and fade resistance for hard road use and the occasional track day, while still behaving on a cold morning. Racing is a track compound built for sustained abuse: huge fade resistance and bite once heat is in it, at the cost of more noise and dust when cold. Match the pad to how hard you actually use the brakes — there is no benefit to a race pad that never gets up to temperature.
Caliper grade — Hollow vs Hollow Racing
Hollow is the standard caliper on every kit: a hollow-body forged caliper, lighter than a solid one, fitted with a dust cover and backed by a 5-year oil-leak warranty. For most fast-road and spirited track use it is all the caliper you need.
Hollow Racing is the track-grade upgrade. It runs the same hollow body but without a dust cover (so there is nothing to melt at sustained high temperature), uses a twin-metal piston that isolates heat travelling from the disc to the oil seal, and is rated to 1000°C. Available 330–356mm (rear). Warranty is 2 years on oil leaks and 10 years on appearance. Built for professional racing and repeated track days.

Caliper colour & finish
Painted colours (Red, Yellow, Gold, Black, Anodized Black) are included at no cost. Want an exact match to your car? Custom Color (+£150) paints the calipers to any Pantone code you supply (15–20 day lead time).
Polished Forged finishes are the flagship: a forged caliper given a mirror-polished surface treatment that shifts colour with the viewing angle. Beyond the looks, the polished surface dissipates heat better, resists rust and stands up to the weather. Choose Titanium (neochrome, +£350), Polished Gold (+£300) or Polished Silver (+£250). They look their best paired with a titanium centre bell. Care: clean only with a dilute neutral cleaner or water.
Candy colours (+£200) use a deep candy-paint and polishing process for a mirror-reflection, boutique finish — pick Teal, Blue, Red or Orange (shown below right).


Centre bells
The centre bell is the CNC-machined aluminium hat that joins the disc to the hub. The standard anodized centre bell is included. The Two-tone bell (+£200) adds an anodized accent ring — choose Red, Yellow, Orange, Purple or Silver right here at checkout. The Titanium centre bell (+£500) is a forged titanium bell (bolts not included) that finishes off the polished-forged look.

Other products that fit this vehicle
Front & rear brake kits, coilovers and more for this car
