
XYZ Racing Hollow Front Brake Kit — Mercedes Benz CL 500 W215 (2000-2002)
SKU: XYZ-BRK-BKF-ME-051-FRONT
- IncludesFront axle pair (2 discs + 2 calipers)
- PositionFront
- Disc Ø356–444 mm
- Caliper pots6 / 8 / 12-pot
- Lead time10–15 working days
Fits Mercedes Benz CL 500 W215 (2000-2002)
Added to basket ✓
Caliper render for this kit:

At nearly two tonnes, the W215 CL 500 sits at the upper end of what a front brake circuit is routinely asked to manage, and the M113 5.0 V8 sees to it that speed accumulates quickly enough to make that mass count. Mercedes’ factory front brakes handle the car’s everyday demands, but sustained hard stops from motorway pace build temperatures that road-spec pads were never calibrated to absorb without consequence.
This XYZ Racing front big brake kit is a direct front-axle upgrade for the CL 500 W215, fitted across the 2000-2002 build window. It is a matched pair of left and right calipers and two-piece floating discs. Three pad compounds, Street, Sport and Racing, give owners the ability to match the kit’s friction character to their driving, from reserved fast-road use through to circuit work where thermal endurance between corners becomes the governing factor.
What this brake kit does for your 2000-2002 Mercedes Benz CL 500 W215
Stopping close to two tonnes repeatedly from high speeds demands front hardware with genuine thermal headroom, and this kit addresses the specific gap between the W215’s factory brake specification and the demands of sustained hard driving. The hollow-vane disc construction improves heat dissipation at the front axle, maintaining consistent pedal feel across successive hard applications where a solid disc would be accumulating soak heat through its mass. Reduced rotating and unsprung mass quickens response, and the two-piece floating construction controls expansion. The Racing compound extends that capability further, raising the temperature ceiling to cover track-day sessions without the pedal travel increase that signals an overworked brake. Sport fills the sensible intermediate position with more bite and heat range than the road default, without the cold-sensitivity that makes a full race pad impractical on wet British roads. Street is the quiet, low-dust everyday choice. Braided lines keep the pedal firm.
About the Hollow Front Brake Kit
This XYZ Racing front big brake kit builds around a hollow-vane disc designed to reduce unsprung rotational mass while preserving the thermal capacity required for sustained deceleration loads, a pairing that matters on a platform like the W215 where kerb weight is a constant factor and braking demand follows accordingly. The caliper is hollow-bodied as standard. Three compounds, Street, Sport and Racing, allow owners to calibrate friction behaviour to their actual use case rather than accepting a single compound that compromises across the range. Discs come drilled or slotted at the same price, and an optional Hollow Racing caliper upgrade for serious track work drops the dust cover, is rated to 1000C and carries a two-year warranty. The front-only position is appropriate: deceleration physics places the greatest thermal and mechanical demand on the leading axle of any front-engined coupe, and that is precisely where this kit concentrates its upgrade.
Caliper finish is selectable when you order. Five painted colours are included at no extra cost: Red, Yellow, Gold, Black and Anodized Black. A Custom Color in any Pantone is £150, with premium polished-forged finishes in Titanium, Polished Gold and Polished Silver, plus candy finishes in Teal, Blue, Red and Orange. Two-tone centre bells in five anodized colours, or titanium, are selectable at checkout to complement or contrast the CL’s standard alloy profile.
Fitment for the Mercedes Benz CL 500 W215 (2000-2002)
This front brake kit is developed for the early W215-generation CL 500, covering the 2000-2002 production window specifically. The W215 body series ran through to 2006 in standard production, so owners of post-2002 CL 500 examples should confirm fitment separately before ordering. No trim or variant subdivision is noted in the fitment specification.
What buyers also search for
- Mercedes Benz CL 500 W215 big brake kit for sustained high-speed stopping (2000-2002)
- W215 CL 500 front brake upgrade with Street, Sport and Racing pad compound options
- Mercedes CL 500 W215 front brake hardware for a near-two-tonne luxury GT
- CL 500 W215 front caliper finish options including Red, Yellow, Gold and Black
- Mercedes Benz W215 coupe front brake kit 2000-2002 thermal endurance upgrade
Select your pad compound, disc style and caliper finish when you order to build a configurable specification rather than a fixed-spec part.
What’s in the kit
Front axle kit — supplied as a complete bolt-on assembly.
- 2×Two-piece floating discs — 356–444 mm: you pick the exact diameter with the "Disc size" option
- 2×Lightweight aluminium centre bells
- 2×Forged aluminium calipers — 6 / 8 / 12-pot
- 2×High-stiffness mounting brackets
- 2×Braided stainless steel brake lines
- 4×High-performance brake pads (1 set)
- 1×Fitting hardware & tools pack
Choosing your spec
Every kit is built to order around the choices you make above. Here is what each option actually changes, so you can spec yours with confidence.
Brake pads — Street, Sport or Racing
Every kit ships with a full set of high-performance pads; the compound is your call.
Street is the right default for fast-road driving — a strong, progressive cold bite with low noise, low dust and long disc life. Sport raises the working temperature and adds bite and fade resistance for hard road use and the occasional track day, while still behaving on a cold morning. Racing is a track compound built for sustained abuse: huge fade resistance and bite once heat is in it, at the cost of more noise and dust when cold. Match the pad to how hard you actually use the brakes — there is no benefit to a race pad that never gets up to temperature.
Caliper grade — Hollow vs Hollow Racing
Hollow is the standard caliper on every kit: a hollow-body forged caliper, lighter than a solid one, fitted with a dust cover and backed by a 5-year oil-leak warranty. For most fast-road and spirited track use it is all the caliper you need.
Hollow Racing is the track-grade upgrade. It runs the same hollow body but without a dust cover (so there is nothing to melt at sustained high temperature), uses a twin-metal piston that isolates heat travelling from the disc to the oil seal, and is rated to 1000°C. Available 286–380mm (front). Warranty is 2 years on oil leaks and 10 years on appearance. Built for professional racing and repeated track days.

Caliper colour & finish
Painted colours (Red, Yellow, Gold, Black, Anodized Black) are included at no cost. Want an exact match to your car? Custom Color (+£150) paints the calipers to any Pantone code you supply (15–20 day lead time).
Polished Forged finishes are the flagship: a forged caliper given a mirror-polished surface treatment that shifts colour with the viewing angle. Beyond the looks, the polished surface dissipates heat better, resists rust and stands up to the weather. Choose Titanium (neochrome, +£350), Polished Gold (+£300) or Polished Silver (+£250). They look their best paired with a titanium centre bell. Care: clean only with a dilute neutral cleaner or water.
Candy colours (+£200) use a deep candy-paint and polishing process for a mirror-reflection, boutique finish — pick Teal, Blue, Red or Orange (shown below right).


Centre bells
The centre bell is the CNC-machined aluminium hat that joins the disc to the hub. The standard anodized centre bell is included. The Two-tone bell (+£200) adds an anodized accent ring — choose Red, Yellow, Orange, Purple or Silver right here at checkout. The Titanium centre bell (+£500) is a forged titanium bell (bolts not included) that finishes off the polished-forged look.

Other products that fit this vehicle
Front & rear brake kits, coilovers and more for this car
