
XYZ Racing Top Sport Coilovers — Volkswagen POLO 6N2 (TYPE 3) 1999-2001
SKU: VO39-TS
- IncludesFull set of 4 (front + rear)
- Spring rate (F/R)18 / 4 kg/mm
- Top mountPillow ball + rubber / Hardened rubber / OE (factory) mount
- Lead time10–15 working days
Fits Volkswagen POLO 6N2 (TYPE 3) (1999-2001) chassis VO39
Added to basket ✓

The 6N2 is a light, front-wheel-drive hatchback with MacPherson struts at the front and a torsion beam rear – a configuration that keeps manufacturing costs low but leaves the chassis’s handling latitude largely unexplored by the factory calibration. Volkswagen set the damping for everyday comfort, not for the kind of corner-entry confidence the car’s lightweight structure is actually capable of.
For the Volkswagen Polo 6N2 (Type 3) 1999-2001, the XYZ Racing Top Sport coilover reconfigures the suspension around actual performance use. Spring rates run 2kg/mm above street specification and damping is set 30-50% firmer – changes that take the car’s genuine lightness and give the chassis a suspension setup that can exploit it.
What this coilover does for your 1999-2001 Volkswagen POLO 6N2 (TYPE 3)
On a front-wheel-drive chassis, body roll directly affects front tyre loading. The 6N2’s factory setup allows enough roll in hard cornering to lighten the inside front – at which point traction on the driven axle suffers precisely when you need it. The Top Sport’s stiffer spring rates compress that roll, keeping both front tyres working through corners and giving the layout a better chance to accelerate cleanly off the apex. The 30-50% damping increase handles transient load changes: sharp turn-in, mid-corner bumps, the compression through a crested section. Ride quality on road shifts noticeably – this is not a comfort product – but the setup remains driveable between sessions.
About the Top Sport coilover
XYZ Racing’s Top Sport series occupies the space between their standard street coilovers and full competition hardware. The calibration is drawn from XYZ Racing’s own track programme – not worked backward from a comfort baseline – with damping set 30-50% firmer than their street specification and spring rates 2kg/mm above that same benchmark. The elevated spring rate controls body attitude and tyre contact over uneven surfaces; the uprated damping absorbs sharp impacts and suppresses body movement when the road surface changes quickly beneath the car. Suitable for track day use and committed fast-road driving, the Top Sport is not a dedicated race coilover, but the settings it carries are informed by XYZ Racing’s competition experience rather than derived from a road comfort compromise. That distinction matters when you are running the car hard on circuit.
Fitment for the Volkswagen POLO 6N2 (TYPE 3) (1999-2001)
This kit is configured specifically for the Volkswagen Polo 6N2 (Type 3) three-door hatchback, covering the 1999 to 2001 production years under chassis code VO39. No additional trim variants are noted; confirm your car’s standard suspension layout – MacPherson front struts and torsion beam rear – matches the unmodified factory configuration before ordering.
What buyers also search for
- Volkswagen Polo 6N2 coilover upgrade for track day and fast-road driving
- Polo 6N2 Type 3 height-adjustable suspension for improved handling and lower stance
- XYZ Racing Top Sport coilovers for Volkswagen Polo 1999-2001
- Polo 6N2 front MacPherson coilover kit to reduce body roll on a front-wheel-drive hatchback
- Volkswagen Polo 6N2 Type 3 club motorsport suspension for 1999-2001
Select your specification and configure the Top Sport coilover for your Polo 6N2 below.
Top mounts included with your kit
Every XYZ Racing coilover kit ships with the upper mounts listed below for your exact chassis — no extra parts to source.
Pillow ball + rubberP+Pillow-ball upper with a rubber insert — adds steering precision and camber adjustability while keeping some of the factory mount’s harshness damping.
Hardened rubberRHardened rubber upper — firmer than the factory bush for tighter response while retaining road-friendly noise and vibration isolation.
OE (factory) mountOERetains the OEM (factory) upper mount — preserves the original ride comfort, noise and vibration behaviour for a stock-like feel.
Other products that fit this vehicle
Coilover ranges, brake kits and wheels for this car
-
Super SportXYZ Racing Super Sport Coilovers — Volkswagen POLO 6N2 (TYPE 3) 1999-2001
£990.00 inc. VATView → -
Racing SpecXYZ Racing Racing Spec Coilovers — Volkswagen POLO 6N2 (TYPE 3) 1999-2001
£1,690.00 inc. VATView → -
Tarmac RallyXYZ Racing Tarmac Rally Coilovers — Volkswagen POLO 6N2 (TYPE 3) 1999-2001
£1,690.00 inc. VATView → -
Gravel RallyXYZ Racing Gravel Rally Coilovers — Volkswagen POLO 6N2 (TYPE 3) 1999-2001
£1,690.00 inc. VATView → -
Street AdvancedXYZ Racing Street Advanced Coilovers — Volkswagen POLO 6N2 (TYPE 3) 1999-2001
£1,990.00 inc. VATView → -
Pro RallyXYZ Racing Pro Rally Coilovers — Volkswagen POLO 6N2 (TYPE 3) 1999-2001
£6,000.00 inc. VATView → -
Drag RacingXYZ Racing Drag Racing Coilovers — Volkswagen POLO 6N2 (TYPE 3) 1999-2001
£1,690.00 inc. VATView → -
Pro Racing Gravel/SnowXYZ Racing Pro Racing Gravel/Snow Coilovers — Volkswagen POLO 6N2 (TYPE 3) 1999-2001
£3,390.00 inc. VATView →