Skip to content

Drift Spec

XYZ Racing Drift Spec Coilovers — Toyota NOAH AZR60 2001-2007

SKU: AZR60-DS

  • IncludesFull set of 4 (front + rear)
  • Spring rate (F/R)12 / 14 kg/mm
  • Top mountPillow ball + rubber / OE (factory) mount
  • Lead time10–15 working days

Fits Toyota NOAH AZR60 (2001-2007) chassis AZR60

Front spring rate (kg/mm)

12 kg/mm recommended

The recommended rate is the factory setup for your exact car — leave it unless a suspension specialist has specified otherwise. Recommended: 12 kg/mm. A custom rate on this axle adds £80.00.

Rear spring rate (kg/mm)

14 kg/mm recommended

The recommended rate is the factory setup for your exact car — leave it unless a suspension specialist has specified otherwise. Recommended: 14 kg/mm. A custom rate on this axle adds £80.00.

Configured price£1,690.00Inc. VAT

Lead time: 10–15 working days from payment


£1,690.00

Made to order. Full payment is taken at checkout. Production begins once payment is confirmed.

Pay by card, Apple Pay, Google Pay — or Klarna on eligible orders.

XYZ Racing Drift Spec Coilovers — Toyota NOAH AZR60 2001-2007

The AZR60 NOAH was engineered as a comfortable people-carrier, which means a tall body, a high centre of gravity and soft factory damping that lets the whole car lean and pitch the moment you load the nose. The XYZ Racing Drift Spec coilover for the Toyota NOAH AZR60 goes straight at that weakness: it drops the ride height, takes the slack out of body control and turns a comfort-tuned MPV into a platform stable enough to set and hold an angle.

This is the drift-focused tune in the XYZ Racing range, built around keeping the body composed through fast direction changes rather than soaking up motorway expansion joints. On a nose-heavy, front-strut chassis that left the factory tuned for school runs, that kind of body control is the entire reason to fit it.

What this coilover does for your 2001-2007 Toyota NOAH AZR60

Lowering the AZR60 NOAH on this kit pulls that tall body closer to the road and cuts the lean that the standard struts allow under turn-in. The height adjustment lets you set the stance you want and then corner-balance the car so it loads evenly. Crucially, the Drift Spec valving keeps usable bump stroke after you lower it, so the front end still travels and grips instead of crashing onto the stops. The result is a NOAH that changes direction with intent, settles quickly mid-slide, and gives you a predictable platform to lean on when you are committing to angle.

About the Drift Spec coilover

The Drift Spec coilover is the tune XYZ Racing designed specifically for drift use. The damping and geometry are set up to stabilise the body during high-speed cornering, so the chassis stays planted while you carry speed into a turn and work toward a clean, sustained angle. It is engineered to enhance drift performance rather than ride quality, and the height adjustment is matched to a deliberately judged bump stroke. Drop the ride height as intended and the car retains the suspension travel it needs to stay controllable, which is what lets you manage the slide precisely rather than fighting a car that has run out of movement. In short, it trades the NOAH’s stock comfort bias for the body discipline a sideways car demands.

Fitment for the Toyota NOAH AZR60 (2001-2007)

This kit is built for the AZR60 generation Toyota NOAH, covering the 2001 to 2007 model years. It suits the front-strut layout of this chassis code. Confirm your AZR60 chassis stamp against the model year before ordering so the spec lands correctly on your car.

What buyers also search for

  • Toyota NOAH AZR60 coilovers for drift and stance builds
  • AZR60 NOAH suspension upgrade to cut body roll and lower ride height
  • Height-adjustable Drift Spec coilovers for the 2001-2007 Toyota NOAH
  • Toyota NOAH AZR60 drift suspension that holds bump stroke after lowering

Choose your ride-height and spec options and configure yours below.

This suspension is designed for Drift race especially. With its special design, it helps the racers stabilize the vehicle body while in high speed turning in order to make a perfect angle. It can also enhance drifting performance. After lowing the ride height with proper bump stroke, you will realize how we made the drift controlling to the excellent condition.

Top mounts included with your kit

Every XYZ Racing coilover kit ships with the upper mounts listed below for your exact chassis — no extra parts to source.

  • Pillow ball + rubber top mountPillow ball + rubberP+Pillow-ball upper with a rubber insert — adds steering precision and camber adjustability while keeping some of the factory mount’s harshness damping.
  • OE (factory) mount top mountOE (factory) mountOERetains the OEM (factory) upper mount — preserves the original ride comfort, noise and vibration behaviour for a stock-like feel.
Same car

Other products that fit this vehicle

Coilover ranges, brake kits and wheels for this car