XYZ Racing Drift Spec Coilovers — Cmc J SPACE (OE Lower 50mm) 2024-2026

The Cmc J SPACE is a platform built for a discipline most road cars never see – sustained, high-angle, throttle-on slides where the rear has to step out predictably and the front has to hold an aggressive steering input without folding. The Drift Spec coilover exists for exactly that, and on the CM02 chassis with the 50mm-lower OE mount geometry, it gives you the ride height drop and bump stroke to make extreme lock usable rather than terrifying.

Drop the J SPACE on these and the static rake, the loaded-corner attitude, and the transition behaviour all change in your favour. This is a competition-focused damper – not a fast-road compromise dressed up in a different label.

What this coilover does for your 2024-2026 Cmc J SPACE

Lowering the J SPACE with the correct bump stroke is the entire point of this kit, and you feel it the first time you commit to a clutch-kick or a handbrake initiation. The chassis settles flatter under lateral load, so weight transfer to the outside front happens earlier and more cleanly, and the rear breaks away with a slower, more readable rate. Front steering response sharpens with the lower centre of gravity and the loss of body roll, which is what lets you carry more lock without scrubbing speed. On entry, you get a stable platform that holds attitude through the apex; on exit, the rear stays planted long enough to drive out cleanly under power. The 50mm OE-lower geometry means the kit works with the factory pickup points rather than asking you to fabricate.

About the Drift Spec coilover

The Drift Spec is built around one job: stabilising the body during high-speed cornering so the driver can hold a sustained, controlled angle. XYZ Racing’s engineering brief is to make the chassis behave the way a drift driver wants it to behave at the limit, not the way a road car does. Lowered ride height paired with correctly proportioned bump stroke is the foundation – too little stroke and the damper packs over kerbs and transitions; too much and the platform never loads up. The construction is set up for the loading patterns drifting puts through a chassis: heavy outside-front compression, sudden direction reversals on transitions, and prolonged side-load through long sweepers. The intent is a damper that gives the driver the cleanest possible window to read what the car is doing.

Fitment for the Cmc J SPACE (2024-2026)

This kit is specific to the Cmc J SPACE with the OE Lower 50mm front mount geometry, chassis code CM02, model years 2024 to 2026. The 50mm-lower designation refers to the front strut mount position – confirm your car carries the OE 50mm spec before ordering.

What buyers also search for

• Cmc J SPACE coilover kit for competitive drifting and high-angle work
• CM02 chassis suspension upgrade with proper bump stroke for low ride height
• Cmc J SPACE drift coilover designed for sustained-angle stability
• J SPACE 2024-2026 coilover for high-speed transition control
• CM02 drift suspension built around lowered geometry and OE pickup points

Configure your spec below and get the Drift Spec set up for the way you actually drive the J SPACE.